T O P I C R E V I E W
|
cdog301
Member # 5136
|
posted
Ok I have a Kenwood X kdc 717 the face rotates closed when the power is off or you can remove the face after turning off the car. So since Tue the display will not come on at all when you install the face the face just rotates like you turned off the power for you to remove it power/ground are good and all the wires look good! Help!!!!
|
94gt
Member # 3060
|
posted
Check the contacts on the deck and the face, sometimes a little bit of dirt is more than enough to wreak havoc like you are describing. Also, check the inline fuse on the deck, that may have blown as well.
|
cdog301
Member # 5136
|
posted
fuses all good and contacts cleaned
|
50Reasons
Member # 6452
|
posted
put the light tester on the body of radio check if yellow and red wires have power if they do your radio is done
|
95GTConvtACE
Member # 6399
|
posted
quote: Originally posted by 50Reasons: put the light tester on the body of radio check if yellow and red wires have power if they do your radio is done
He is a radio expert so I would listen to him.
|
cdog301
Member # 5136
|
posted
don't own light tester have multimeter use dc setting check for power @ yellow and red and do what with the body of the radio?
|