T O P I C R E V I E W
|
LXjames
Member # 10791
|
posted
Bought this as a hodgepodge set up dude didn't really know much about it but clean title and running was a go for me. How it came Drove it home and it was cutting out. Thought it was fuel but turned out to be a bad ignition/headlight harness. The whole harness was hacked for reference Took out the whole dash and both harnesses no pic sorry Replaced main harness with "sd" reman harness from mustangguy Grey dash with harness and also the light harness from Haulinass Matt On the 2nd or 3rd day of owning it I got a new clutch for it (install is tomorroe) and the correct 86 lx front bumper from a buddy. It looked good when I bought it but I took it to my boys body shop anyways he took it down to bare plastic and had it welded (crack on lower portion) and riveted the header panel and cover back together Auto body express is name of the shop it's on San Leandro blvd accross from Volvo but not where the 4 door nova is! Dark canyon red fenders (not rattle can) mounted and awaiting bumper still no 83-86 hood Ordered a vent grill since they were on sale (thanks 50resto.com) Original ford unit New repo unit On a night I wasn't getting much done I took a peak under the car and I have tokico struts and shocks Tubular welded in subframe connectors and after market lca's maybe Griggs I'm not sure
Finished product as of tonight getting the fenders aligned bumper is on and bolted hood is still wrong but I layer some towels down so it doesn't gouge the fresh bumper and didn't latch it all the way [ 2015-12-31, 06:45 AM: Message edited by: LXjames ]
|
89TRUNK
Member # 2506
|
posted
There's a red hood with clear coat damage at the fremont pick n pull as well as a nice rear bumper from an 86.
|
Marks93
Member # 11130
|
posted
Nice work James!
|
89TRUNK
Member # 2506
|
posted
Be careful with that hood flying up. The car has potential and sits just right. So far so good...
|
Blk93pny
Member # 11387
|
posted
LMAO.. What a Cleeeeeannn ass car... You never seem to live up to your reputation [ 2015-03-07, 02:57 PM: Message edited by: Blk93pny ]
|
9cobrasvt8
Member # 11078
|
posted
quote: Originally posted by Blk93pny: LMAO.. What a Cleeeeeannn ass car... You never seem to live up to your reputation
Damn what a fuckin hater lol, shit you gotta start somewhere, we arent all rich like you lol
|
Robb
Member # 9444
|
posted
Would like to find a clean beater like this to fix up, Only problem is, Everyone asks a fortune for them. [ 2015-03-07, 03:41 PM: Message edited by: Robb ]
|
i
Member # 12534
|
posted
Who cares at least his wrenching. Keep at it
|
5.t0es
Member # 5864
|
posted
I can respect you for wrenchin on your projects bro, More than I can do..keep us posted with the progress and dont give up...
|
LXjames
Member # 10791
|
posted
Thanks for the support guys. I like my buckets. You can buy them cheaper and worth more to me than someone elses handy work.
Towed the car out of my apartment complex (yes Ive been doing all this in my outside stall lol)
Ripped into the car to find an adjustable clutch cable (small win) and a ram cluctch. It was toast but was cool to see
Arp flywheel bolts (5 out of 6) from previous owner
Crappy news was that the Chinese pos clutch fork broke. Not completely but one of the "teeth?" for the pivot ball side broke off so a quick trip to pep boys Union city fixed that. No pic but it's fixed so whatever ill snap a pic tomorrow
Also come to find out, the bearing retainer was dryer than a bitches pussy in the desert! Gouged and heat checked I didn't risk it. Maybe that's why there was a near new one in the trunk I decided to keep a couple weeks ago looking through the car. Popped it off swapped the bearing race and bolted it back together I'm happy about that. Once again I'll have a pic tomorrow showing the two.
Decided while I'm down there I'll be replacing the tail shaft seal so that will be fresh too. Also I don't know anyone else's protocol but I usually throw a rubber glove over the tail shaft to stop the fluid from spilling everywhere. Made the effort but my brother punched it off so a quart or so of ROYAL PURPLE is on the ground. Was kinda happy to find out it was that and was happy to replace the good stuff. I'm running the atf max stuff. Read on other forums it's a good product. Not sure if it's world class or not but I have the 2 tone "cup" near the retainer, light outer and and dark center Clutch goes in tomorrow a because kragen sold me a TOB not a pilot bearing like I asked. Picked one up before they closed and called it a night. Makes it easier to start at sunrise to finish. Also if anyone out here (San Leandro) is availe tomorrow, sunday, I could use some help wiring the car up and getting it to start! Ran when parked haha [ 2015-03-08, 09:50 AM: Message edited by: LXjames ]
|
sic70stang
Member # 4347
|
posted
Good stuff man. Keep us updated
|
70stang351w
Member # 9948
|
posted
Nice Progress keep up the work and pics
|
LXjames
Member # 10791
|
posted
More pics Oh and yesterday was so nice out we had all the stangs out Black 93 friends car Silver 05 brothers car My 79 ghia My 86 coupe And not pictured are 2 more cars, my friend Jeffs lx hatch and my 83 coupe I just got (for sale) [ 2015-03-08, 10:29 AM: Message edited by: LXjames ]
|
LXjames
Member # 10791
|
posted
Pos autozone pilot bearing puller brand new never used I wrench it in give a slight tug with the slide and the arm snaps off
|
i
Member # 12534
|
posted
That sucks. Keep us updated so you can give me some motivation to finish my car. May be ill start my thread too. I got bunch off pics but don't know how to upload.
|
Stang66
Member # 10504
|
posted
Water and paper homie!
|
LXjames
Member # 10791
|
posted
Well cars back on 4 wheels! I used loctite on everything lol. I'm getting a sd ecu tomorrow? And I should be driving this week. I pray all my work was better than good enough will post a pic and video
|
NEIGHT
Member # 8741
|
posted
Did you change out the rear main seal? Looks like it's leaking from the pictures.
|
LXjames
Member # 10791
|
posted
No I didnt. Unfortunate it was an after thought. Car doesn't leave a puddle so it can wait. Plus old clutch was dry.
|
LXjames
Member # 10791
|
posted
It's been a while, I've asked a lot of questions haven't really told anyone on here what's been up.
Heres what's been done and or bought and waiting to be installed since my last update: SRA out of a 97 cobra MM extreme duty adjustable LCA Ford motorsport maf conversion (standalone style) Full cobra MC and install kit with wilwood prop valve lines and plug Bought the correct 85/86 style moldings for the section just after the rear wheels Also a 86 rear bumper I scored from pick n pull Picked up some black carpet MGW shifter SVE dark star reps in stainless 17" fronts 15x10 rears Black sill plates from lmr MM panhard bar And not to mention some fox length mosers for disc brakes with arp studs and some nrc brackets to tie it all together (all of which came from duncan motors who is always a top tier business man and knowledgeable to boot) And yesterday I ended the years car parts shopping by scooping up those brand new black staggered saleens D.R.E had for sale. Great guy to do business with those are with.
CAMD FOX has them as we speak and should be mounted and balanced tomorrow. 245's up front and 265's on the rear. I will go larger in the rear later on down the road but the deal I got for the pair was awesome!
After the Holliday hell is over its back on the grind. The paint shop and the deposit I put down aren't going anywhere but the motor and tranny I would like to run in this car will. So I'm holding off on paint to get a jump on a drive train. Wish you all a happy New Years
|
LXjames
Member # 10791
|
posted
86 tails and the bumper I got at pnp
|