T O P I C R E V I E W
|
88stroked50
Member # 7585
|
posted
ok i have a 88fox gt 347 stroker with trick flow twisted wedge heads, trick flow stage 2 cam, trick flow upper and lower, bbk shorty headers with o/r x pipe, also have fuel rails and msd dist, 1.7 rockers oh and 30lb injectors and throthle and all that intake stuff! i was just wondering if anyone can let me know what might be my hp to the wheels!!!! thanks lmk
|
solbrothers
Member # 7524
|
posted
BENCH RACING AT ITS FINEST!!! well my guess is gonna be between 225 and 1000/
|
SmokinLX
Member # 1684
|
posted
What kind of dyno? Manual tranny? I will say 340/350 if it is'nt a mustang dyno.
|
Blind
Member # 3052
|
posted
5 million horse power.
|
88stroked50
Member # 7585
|
posted
well i have not tried it on any dyno what so ever. im just trying to find out what i should expect from my set up! the only thing i know is that i have taken out pullied 03cobras or i have lost to them by 1 car or less!!! any help! lmk thanks
|
RixSikCobra
Member # 5058
|
posted
quote: Originally posted by 88stroked50: well i have not tried it on any dyno what so ever. im just trying to find out what i should expect from my set up! the only thing i know is that i have taken out pullied 03cobras or i have lost to them by 1 car or less!!! any help! lmk thanks
Well, if you've taken down pullied Cobras, then you've gotta be between 425 and 525...because that's the range of pullied Cobras...depending on what other mods they may have in conjunction with a simple pulley swap. A 2.8 pulley, tune, CAI, exhaust is about 425-450rwhp. [ June 11, 2007, 07:40 PM: Message edited by: RixSikCobra ]
|
adower
Member # 5955
|
posted
Im with the other dude....around 350 [ June 11, 2007, 07:41 PM: Message edited by: adower ]
|
91 5.0 5speed
Member # 1867
|
posted
quote: Originally posted by RixSikCobra: quote: Originally posted by 88stroked50: well i have not tried it on any dyno what so ever. im just trying to find out what i should expect from my set up! the only thing i know is that i have taken out pullied 03cobras or i have lost to them by 1 car or less!!! any help! lmk thanks
Well, if you've taken down pullied Cobras, then you've gotta be between 425 and 525...because that's the range of pullied Cobras...depending on what other mods they may have in conjunction with a simple pulley swap. A 2.8 pulley, tune, CAI, exhaust is about 425-450rwhp.
Nah, you gotta figure foxbodies weigh ALOT less than 03-04 Cobras which means it would not take equal equal HP or more than a 03-04 Cobrqa to beat it. Since he said he loses by one car or so. I would think he has 300rwhp or so
|
88stroked50
Member # 7585
|
posted
well i know some have the 2.9 or is the the 2.8 not sure but they have been tuned adn also have a bit more bolt on parts like intake and exhaust!!! my engine was done by johnb! lmk thanks [ June 11, 2007, 07:47 PM: Message edited by: 88stroked50 ]
|
RixSikCobra
Member # 5058
|
posted
quote: Originally posted by 91 5.0 5speed: quote: Originally posted by RixSikCobra: quote: Originally posted by 88stroked50: well i have not tried it on any dyno what so ever. im just trying to find out what i should expect from my set up! the only thing i know is that i have taken out pullied 03cobras or i have lost to them by 1 car or less!!! any help! lmk thanks
Well, if you've taken down pullied Cobras, then you've gotta be between 425 and 525...because that's the range of pullied Cobras...depending on what other mods they may have in conjunction with a simple pulley swap. A 2.8 pulley, tune, CAI, exhaust is about 425-450rwhp.
Nah, you gotta figure foxbodies weigh ALOT less than 03-04 Cobras which means it would not take equal equal HP or more than a 03-04 Cobrqa to beat it. Since he said he loses by one car or so. I would think he has 300rwhp or so
I was wonderin' how much they weigh. They'd be "ALOT" less if a 300-350 rwhp car can beat a 425-450rwhp car, though. Are they THAT light?...we'd be talkin' close to 3000 lbs if my calculations are even remotely correct. That'd be sweet if our Cobras weighed in at 3k
BTW, are ya comin' to the cruise next Sun?
|
RixSikCobra
Member # 5058
|
posted
quote: Originally posted by 88stroked50: well i know some have the 2.9 or is the the 2.8 not sure but they have been tuned adn also have a bit more bolt on parts like intake and exhaust!!! my engine was done by johnb! lmk thanks
He's d be the man to ask, for sure.
|
JohnB
Member # 969
|
posted
quote: Originally posted by 88stroked50: well i know some have the 2.9 or is the the 2.8 not sure but they have been tuned adn also have a bit more bolt on parts like intake and exhaust!!! my engine was done by johnb! lmk thanks
Is this Francisco?
If so, that combo is good for a honest 350-355 rwhp...untuned.
|
88stroked50
Member # 7585
|
posted
na this is hector from san jose with that black foxbody! you did my engine last year memeber!!!
|
JohnB
Member # 969
|
posted
Wuzzup! Ya, I remember...that was a while ago! Welcome to the board~
|
88stroked50
Member # 7585
|
posted
yeah thanks wat up! hey so wat do you think my car would be pushing, john???
|
Blind
Member # 3052
|
posted
quote: Originally posted by RixSikCobra: quote: Originally posted by 91 5.0 5speed: quote: Originally posted by RixSikCobra: quote: Originally posted by 88stroked50: well i have not tried it on any dyno what so ever. im just trying to find out what i should expect from my set up! the only thing i know is that i have taken out pullied 03cobras or i have lost to them by 1 car or less!!! any help! lmk thanks
Well, if you've taken down pullied Cobras, then you've gotta be between 425 and 525...because that's the range of pullied Cobras...depending on what other mods they may have in conjunction with a simple pulley swap. A 2.8 pulley, tune, CAI, exhaust is about 425-450rwhp.
Nah, you gotta figure foxbodies weigh ALOT less than 03-04 Cobras which means it would not take equal equal HP or more than a 03-04 Cobrqa to beat it. Since he said he loses by one car or so. I would think he has 300rwhp or so
I was wonderin' how much they weigh. They'd be "ALOT" less if a 300-350 rwhp car can beat a 425-450rwhp car, though. Are they THAT light?...we'd be talkin' close to 3000 lbs if my calculations are even remotely correct. That'd be sweet if our Cobras weighed in at 3k
BTW, are ya comin' to the cruise next Sun?
yes, foxbodies weigh right around 3000#s.
|
Luke87GT
Member # 21
|
posted
340rwhp
|
03smknsvt
Member # 5514
|
posted
am guessing not enough, since he couldnt hang with me . i think about 365rwhp
|
Fox Lightning
Member # 7658
|
posted
350-365rwhp
|
88stroked50
Member # 7585
|
posted
hey thanks o3smknsvt they didnt have to know i lost you foo, thanks anyway, anyone else! lmk thanks
|
VNMES 03
Member # 5401
|
posted
quote: Originally posted by 88stroked50: hey thanks o3smknsvt they didnt have to know i lost you foo, thanks anyway, anyone else! lmk thanks
i say we try them out with the white one. u going to the track 2moro or what?
|
88stroked50
Member # 7585
|
posted
dont know my tranny is messeed up. sunday i raced this other 03 and the tranny cyncros messed up hella grinding in 3rd and 4th!!! but IM WILLING TO GIVE A STREET RUN LIKE THAT, THATS IF YOUR DOWN!!!! [ June 13, 2007, 03:37 AM: Message edited by: 88stroked50 ]
|