T O P I C R E V I E W
|
alexdel209
Member # 9239
|
posted
ive been looking for a power adder to put on my 01 cobra.ive seen some write ups and good reviews for the on3 performance kit they are priced pretty well .so i was wondering if anyone on the board has one or has installed them and how they peroform and hold up.thanx for the info in advance
|
Luke87GT
Member # 21
|
posted
long write up on this on svtp... do a search
I think that particular car is FS right now too...
I prefer Turbo but the Vortech will be smog legal if it matters
|
alexdel209
Member # 9239
|
posted
smogs no worry but i think that write up is on a 98 cobra with a mach block and there is no news on how its holdin up
|
Y2K 281
Member # 10132
|
posted
Only things I would use from that kit are the piping and a bit of the hardware that comes with it. I am looking at doing a setup using their hot side and cold side but I will have the welds professionally checked, jet hot coated, and cold side powdercoated. Then, instead of their crap turbos will be switching to a Precision ball bearing turbo and good quality wastegates and bov. Turbo's can be a nightmare if you go cheap on the things that count. I suggest going with the better quality turbo at the bare minimum if going this route.
|
NCALSVT
Member # 3205
|
posted
the sonic blue cobra on svtp is solid,my boy bought a kit from on3performance for his cobra and I was surprised but the piping and the welding,for the price u can't beat it,I would upgrade tge wastegates and the turbo unite it's self tho
|