T O P I C R E V I E W
|
306notchback510
Member # 6204
|
posted
Started a little new project to my P71 by switching it to a 5speed . Here is a couple of current pics .
[ March 10, 2010, 09:29 PM: Message edited by: 306notchback510 ]
|
89bluenotch
Member # 7454
|
posted
That will be fun!!!
|
89foxstang
Member # 5908
|
posted
thats gonna be cool! did you take the cluster out of a mustang or something? i wonder about clutch cable... or is this a pretty common swap? awesome project though !
|
306notchback510
Member # 6204
|
posted
Yes it will be hella fun cause the rearend is a 3:73 with trac loc. Just the pedals are off a mustang and the clutch cable is going to be out of a stock mustang. Got most of the parts from a wreck Mach 1. If anybodys got a stock '01-'04 clutch cable I need one. I'll post more pics as I do more
|
50 Deep
Member # 6216
|
posted
Wo what all do you need to do for the swap? Using a t-45 or tremec 3650? Custom driveshaft and trans mount? Cutting the floor board?
|
306notchback510
Member # 6204
|
posted
on vic's you can use either a t-45 or the tremec 3650 ( which is what i have), a stock pedal assembly off an '01-'04 mustang ( u got to cut it out and weld the tube on to the vic's assembly), the mustang yoke for the trans ,make a little notch on the stock cross member and make the drive shaft a little longer. I'll post more pics as soon as i get more stuff done
|
ugotsmoked
Member # 6069
|
posted
i have the clutch cable
|