T O P I C R E V I E W
|
CaliCoop
Member # 7031
|
posted
First off, I have a 1994 GT rearend in my 1990 5.0, i need to know where to buy hard brake line ti fit in the rearend brake calipers, have tried kragen and auto zone and they dont have it, i know im not the first person to try this conversion, anyone have knowledge would be great ly appreciated, I need to get line from the brake fluid distributor block that sits on the rearend housing. , i hope someone knows what im talking about
|
Blind
Member # 3052
|
posted
use the hardline from your old 8.8" drum rearend, get a pair of weatherhead 7818 adapter fittings from napa, and you will be able to connect your hardline into the brake hoses on the 94gt calipers.
you will need to bend the ends of the hardline a bit to shorter it, I just used a large deep socket and bent it around into a few s-shapes.
|
CaliCoop
Member # 7031
|
posted
hey thanx man im going to try it out and i will let you know whats the outcome
|
warhorse58gt
Member # 7702
|
posted
all i did was cut the stock hard line and reflaired it. then zipped tied the rubber line to the axle tube.
|
DRIVINFST
Member # 2430
|
posted
I used the stock fox rubber line and T block with the 94 hard lines on mine. Bolts right up w/o adapters, bending, cutting.
|
CaliCoop
Member # 7031
|
posted
Hey guys I used my foxbody hard line and bent them but I used 2000 8.8 soft lines to connect them and everything worked out, so now I can stop this crazy stang thanx for all the input
|