Author
|
Topic: Yessss, ordered more stuff for Cobra!
|
03SVTPower
CAFords OG
Member # 518
|
posted
Still waiting for my 4lbs Metco kit to get here, turns out its on frickin backorder, but should be shipping out today, ordered it back in April!
Just ordered 2.93" ring from billet flow along with the rest of the idlers,Already have the 100mm tensioner on there! So ill be swapping out the 2.76 ring with the 2.93 along with having the 3 100mm idlers/1 92mm idler and then the 4lbs lower to go with it! It's coming together, next will be a visit to Shaun to have it put on and tuned, time to ditch the predator and go SCT with a true tune ! Hopefully this will get the car around the 520rwhp mark and over 500+rwt.
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
Good to see you putting more into her Ryan
I know you're not a huge track guy but i wouldn't expect too..too much from that change track wise.
But on the street that should be killer
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
quote: Originally posted by TRIXSNK: Good to see you putting more into her Ryan
I know you're not a huge track guy but i wouldn't expect too..too much from that change track wise.
But on the street that should be killer
Exactly its just more for bragging rights between my dad and brother I cant drive very well at the track anyway I might invest in some stickies for my spare rims and use those for whenever i feel the need to go to the track, either way you look at it, i dont think i could get the car down the track like you did, me being 260lbs compared to you being about 170 Might have to invite you back out to the track to drive it for me!lol
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote: Originally posted by 03SVTPower: either way you look at it, i dont think i could get the car down the track like you did, me being 260lbs compared to you being about 170 Might have to invite you back out to the track to drive it for me!lol
Thanks for the compliment i think....even though you do have me by about 100lbs that's only a tenth in the big picture....IT'S ALL ABOUT THE LAUNCH!
Anytime you head out to the track let me know i'd love to get back into the driver's seat again
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
87GeeTee
¯
Member # 5905
|
posted
Sweet! But, when is the nawz going to be strapped on?
-------------------- Member #: 5145 Join Date: Dec 2004 PWA Owner & SRA Member Two-Gun Motorsports
2002 GT; Gone But Not Forgotten 1987 GT Vert (Sold!)
Posts: 4278 | From: San Pablo | Registered: Aug 2005
| :
|
|
94gt
¯
Member # 3060
|
posted
Killer man!!! Thats the setup I want to go with!!! You have to let me know how it turns out!!
Ryan, did you ever get a pulley puller? I have the billetflow one back in Benicia, if you want to borrow it to pull the 2.76 and slap that 2.93 on... PM me, I can arrange it for ya man!
What belt length are you gonna order? I need to know too... rofl!
hopefully by the time I get back, Ill have the same mods waiting for me to install bro! Ill prolly even sell the predator and get an SCT too.. I went with the Reichard Racing 100mm idlers(3ea) and the UPR tensioner @ 92mm (1ea) lol Its like you read my mind, rofl.
-------------------- 2020 Explorer ST 2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
klonoa
¯
Member # 1771
|
posted
Nice. I recently ordered some nitto dr's for the stock rims
-------------------- 2003 Mustang Cobra - 454 rwhp - 470rwtq Ex. 2001 vortech'ed v6.
Posts: 938 | From: Richmond, Cali. | Registered: Sep 2002
| :
|
|
94gt
¯
Member # 3060
|
posted
quote: Originally posted by klonoa: Nice. I recently ordered some nitto dr's for the stock rims
that alone should help kill some of that evil wheel hop. I was happy once I slapped on my Fr500's 18x10 285/35 BFG KDW2's... killed it until I swapped pullies... lol
-------------------- 2020 Explorer ST 2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
RixSikCobra
¯
Member # 5058
|
posted
Sounds saaaweett, Ryan. You're gonna love that 4lb lower. The torque is pretty insane for the streets . I really like my combo of 2.8/4#, but from what I've heard, the 2.93/4# is a better, more efficient setup .
-------------------- 2004 Terminator Torch Red Vert Built,Ported,Cammed,Juiced
Posts: 2120 | From: Pleasanton | Registered: Nov 2004
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
quote: Originally posted by 94gt: Killer man!!! Thats the setup I want to go with!!! You have to let me know how it turns out!!
Ryan, did you ever get a pulley puller? I have the billetflow one back in Benicia, if you want to borrow it to pull the 2.76 and slap that 2.93 on... PM me, I can arrange it for ya man!
What belt length are you gonna order? I need to know too... rofl!
hopefully by the time I get back, Ill have the same mods waiting for me to install bro! Ill prolly even sell the predator and get an SCT too.. I went with the Reichard Racing 100mm idlers(3ea) and the UPR tensioner @ 92mm (1ea) lol Its like you read my mind, rofl.
No puller need when swapping rings.. Just unbolt the 2.76 ring and slide the 2.93 onto the hub and rebolt!
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
94gt
¯
Member # 3060
|
posted
quote: Originally posted by 03SVTPower: quote: Originally posted by 94gt: Killer man!!! Thats the setup I want to go with!!! You have to let me know how it turns out!!
Ryan, did you ever get a pulley puller? I have the billetflow one back in Benicia, if you want to borrow it to pull the 2.76 and slap that 2.93 on... PM me, I can arrange it for ya man!
What belt length are you gonna order? I need to know too... rofl!
hopefully by the time I get back, Ill have the same mods waiting for me to install bro! Ill prolly even sell the predator and get an SCT too.. I went with the Reichard Racing 100mm idlers(3ea) and the UPR tensioner @ 92mm (1ea) lol Its like you read my mind, rofl.
No puller need when swapping rings.. Just unbolt the 2.76 ring and slide the 2.93 onto the hub and rebolt!
My mistake, I thought I had read pulley instead of ring... lol. What size belt did you order?
-------------------- 2020 Explorer ST 2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
quote: Originally posted by 94gt: quote: Originally posted by 03SVTPower: quote: Originally posted by 94gt: Killer man!!! Thats the setup I want to go with!!! You have to let me know how it turns out!!
Ryan, did you ever get a pulley puller? I have the billetflow one back in Benicia, if you want to borrow it to pull the 2.76 and slap that 2.93 on... PM me, I can arrange it for ya man!
What belt length are you gonna order? I need to know too... rofl!
hopefully by the time I get back, Ill have the same mods waiting for me to install bro! Ill prolly even sell the predator and get an SCT too.. I went with the Reichard Racing 100mm idlers(3ea) and the UPR tensioner @ 92mm (1ea) lol Its like you read my mind, rofl.
No puller need when swapping rings.. Just unbolt the 2.76 ring and slide the 2.93 onto the hub and rebolt!
My mistake, I thought I had read pulley instead of ring... lol. What size belt did you order?
Havent ordered a belt yet, when i asked BilletFlow people they recommended 2 belts and said which ever one fits better use that one and take the other back...LOL, but they said either/or K080784/K080789 which would be a 78.4" belt or a 78.9" belt from gates, so if you want a gatorback you could atleast know the belt legnth.
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|