|
Author
|
Topic: What do you think?
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
 
 
I am thinking of doing an IRS frontend on my 68 to eliminate the shock towers in the front engine bay so i can change the spark plugs on the 428 bigblock easier.
Anyone know if it will weaken the car a lot?
Anyone know of a company that makes subframe connectors for a 68 Fastback?
Thanks
Dana
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
no it will not weaken the car if u get the right kit such as something from heidts and they utulize mustang 2 suspension ! the kit is about 2500bucks with rack and all but u wilol have to do some cutting and welding! mustangs use the roof and the rocker panels for their strength and the best subframe connectors are the ones from maier racing because they have two mount ing points on both the front and the rear of the connector and in the back they actually kick up into the wheel well section of the frame to hel utilize the roof for strengthning let me know if u need links dana!
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
Fostang
¯
Member # 3752
|
posted
You want to do an independent rear suspension on the front end of your fastback. ![[Confused]](confused.gif)
I think what you ment to say was IFS. Well your in luck because all mustangs are equiped with an independent front suspension. ![[Razz]](tongue.gif)
Now if you really ment to say you wanted to ad a Mustang II front end to remove the the shock towers.
I used a Heidts kit on mine. Rod and Customs makes a good kit as well.
Gives you plenty of room for whatever you want to drop into the beast. ![[Big Grin]](biggrin.gif)
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by v-town coupe:
no it will not weaken the car if u get the right kit such as something from heidts and they utulize mustang 2 suspension ! the kit is about 2500bucks with rack and all but u wilol have to do some cutting and welding! mustangs use the roof and the rocker panels for their strength and the best subframe connectors are the ones from maier racing because they have two mount ing points on both the front and the rear of the connector and in the back they actually kick up into the wheel well section of the frame to hel utilize the roof for strengthning let me know if u need links dana!
I would like pictures of what it looks like after its done and such. Do you know of a site that goes step by step in replacing the stock with the IFS?
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
silverLX
¯
Member # 3207
|
posted
Your car already has IFS, unless someone put a solid axle in the front ![[Eek!]](eek.gif)
[ February 12, 2006, 10:03 PM: Message edited by: silverLX ]
--------------------
88LX hatch 410w
88LX vert gears, exhaust
95GT H/C/I
Posts: 1613 | From: Sonoma County | Registered: Aug 2003
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by silverLX:
Your car already has IFS, unless someone put a solid axle in the front
I didn't think the towers were considered IFS.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
Fostang
¯
Member # 3752
|
posted
Do you know what IFS and IRS is?
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by Fostang:
Do you know what IFS and IRS is?
yeah
IRS = Independent Rear Suspension
IFS = Independent Front Suspension
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
val2000
¯
Member # 5458
|
posted
didnt chris and kwikrob suggest to you to go to alstons? ![[Wink]](wink.gif)
Posts: 36 | From: Turlock CA | Registered: Mar 2005
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by val2000:
didnt chris and kwikrob suggest to you to go to alstons?
yeah but i just want more info. i was hoping someone would say they did it and post pictures.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by 50Reasons:
not good set up for drag racing
Its going to be a streetcar/show car that i might run at the track every now and then
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
jadesville
¯
Member # 5885
|
posted
Theres a couple coil over kits out there i've seen, one is by UP but I dont know if I trust them, you could always notch your towers if you wanted to keep them to make more room. There was a guy on modularfords who notched his towers on his 68' fb to fit a DOHC, only person i've seen to do it.
Here's another IFS company:
http://www.martzchassis.net/page3.htm
[ February 13, 2006, 11:28 AM: Message edited by: jadesville ]
--------------------
1968 Hardtop Coupe
Posts: 229 | From: Portland, OR | Registered: Jul 2005
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
quote:
Originally posted by jadesville:
Theres a couple coil over kits out there i've seen, one is by UP but I dont know if I trust them, you could always notch your towers if you wanted to keep them to make more room. There was a guy on modularfords who notched his towers on his 68' fb to fit a DOHC, only person i've seen to do it.
Here's another IFS company:
http://www.martzchassis.net/page3.htm
thanks man ![[Smile]](smile.gif)
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
|
|
uncle bill
¯
Member # 3953
|
posted
since you may need a fabricator to install your front end,have them install the subframe conectors directly through the subframe
Posts: 415 | From: antioch | Registered: Dec 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
