|
Author
|
Topic: 03 Cobra KB 2.6L 91 Pump Gas Dyno #'s
|
TRIXSNK
¯
Member # 2844
|
posted
 
 
Alright just thought i'd share as there isn't much hard data in regards to this blower on a fairly stock set-up and pump gas let alone 91
A few things....... this was not for all out power i really just wanted to be sure the tune James sent me was safe enough to drive around.
Also this was done with the stock 30,000 mile clutch which was slipping slightly with the ported 2.8"
The run was done on a Mustang Dyno and once i get the clutch in this weekend i'll be sure to get it up on a Dynojet to satisfy everyone that's into #'s.
I really don't care as it will be at the track shortly after and the Mustang Dyno #'s work just fine.
1 more thing i did not log any info as i didn't have much time and just got the Xcal and haven't really played around with the LiveLink software yet but i will once i get the clutch in.
Video will be posted in a short while so you guys can hear what it sounds like under full boost!
445 rwhp
371 rwtq (at max HP)
Mods:
- Steeda CAI
- SCT 2400
- KB single blade TB
- KB 2.6L w/ 3.5" pulley
- 60lb inj.
- Bassani o/r X
- Mac 3" CB
- KB BAP
![[patriot]](graemlins/patriot.gif)
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
Who cares about dyno #'s, We want #'s from the strip!! ![[Whoo Whooooo!]](graemlins/woowoo.gif) Hope it goes smooth for Ya.
--------------------
Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
NorCalRydaz
¯
Member # 3233
|
posted
Excellent numbers for a daily driver. So what times would you expect to get at the track with your setup?
Posts: 2963 | From: San Jo | Registered: Sep 2003
| :
|
|
jayl
¯
Member # 185
|
posted
how many lbs of boost were you seeing ?
--------------------
Facebook.com/TeamTemporary
8.5's TTFBitch!
Posts: 3821 | From: Hayward | Registered: Mar 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by jayl:
how many lbs of boost were you seeing ?
Don't know as i don't have my boost gauge installed yet....but KB said w/ the 3.5" pulley it should be good for about 17psi w/o LT's
Like i said it was mearly for A/F and that's about it.
The numbers should come up with the clutch and some adjustments to the tune and like most i'm trying to go 10's. My old 2.76 and port went 11.60 so given a decent increase in power i hope to go 10.xx but just like anything gotta hook it to do it ![[burnout]](graemlins/burnout.gif)
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
87GeeTee
¯
Member # 5905
|
posted
When did you get another Terminator? ![[Confused]](confused.gif)
Anyway, nice #'s mang! Hit the strip already. ![[Big Grin]](biggrin.gif)
--------------------
Member #: 5145
Join Date: Dec 2004
PWA Owner & SRA Member
Two-Gun Motorsports
2002 GT; Gone But Not Forgotten
1987 GT Vert (Sold!)
Posts: 4278 | From: San Pablo | Registered: Aug 2005
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by 87GeeTee:
When did you get another Terminator?
Anyway, nice #'s mang! Hit the strip already.
Sorry kinda kept it quiet ![[Wink]](wink.gif)
I picked this one up a couple months ago and it had a Steg port and 2.8" and put down 471 hp with the stock clutch as well.
#'s aren't that great as most KB's with about 15-17 psi put down about 540-575 rwhp on 93 oct.
Once i get the new clutch and input shaft in this weekend i'll re-dyno it on a Dynojet and then after Maui it's up to the track we go trying for 10's. ![[dance]](graemlins/dance.gif)
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Those numbers suck.
Why don't you get that clutch in there and then bring the car down to Advanced Engine Development to get a realy tune and forget about that mail order garbage?
FWIW, your old Terminator motor just let go due to a mail order chip.
Just something to think about
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by Yellow94GT:
Those numbers suck.
Why don't you get that clutch in there and then bring the car down to Advanced Engine Development to get a realy tune and forget about that mail order garbage?
FWIW, your old Terminator motor just let go due to a mail order chip.
Just something to think about
Gee thanks....it wasn't a chip but a Predator re-flash ![[Razz]](tongue.gif)
No offense to you guys at AED especially to Shaun it was a long story with the purchase of the KB from the place i got all my parts from in the past and where i got my last tune as well.
Believe me i talked to JeffS about it and have rec. Shuan to all my buddy's that recently picked 03/04 Cobras as i do with most everyone i know that need tuned for Stangs.
In regards to Ryan's car i have yet heard back as to what caused it and believe me i never had a problem with it at all.
I don't know the circumstances as to if/when it let go.
I beleieve i did let Ryan know the fact that it was datalogged when i put the o/r X and Maf x-tender that it would eventually need a BAP or if used in sustained amounts of hi rpm driving.
Can't remember at the time but he did plan to put a lower pulley on it and that would have needed the BAP as well.
Anyway hope to hear back from Ryan to actually find out and the clutch WILL be in by the end of the weekend and back to the dyno for some datalogging.
If things don't work out with my tuner i'll be sure to bring it up to you guys
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
twins
¯
Member # 5069
|
posted
did you buy your car off a guy name steven?
Posts: 559 | From: leandro | Registered: Nov 2004
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by mach1killa:
did you buy your car off a guy name steven?
Yes.
Would you by chance be his friend that has the stock mid pipe?
I never got around to calling him back about it
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
twins
¯
Member # 5069
|
posted
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by mach1killa:
did you buy your car off a guy name steven?
Yes.
Would you by chance be his friend that has the stock mid pipe?
I never got around to calling him back about it
stock mid pipe? did he give you 2 intercoolers?, because when i sold him the ported blower i left mine attached and he was suppose to give me his.
Posts: 559 | From: leandro | Registered: Nov 2004
| :
|
|
TrueBlue
¯
Member # 1063
|
posted
TRIX, I saw your post on ModularFords KB section and was like...."when did he get another Cobra.. " Welcome back!
What are the HP differences between the Mustang Dyno and Dynojet and which one is better?
--------------------
KB '01 GT
[IMG]http://img.photobucket.com/albums/v492/davis769/GIFS/samj.gif[/IMG]
Posts: 1527 | From: Around the way | Registered: Mar 2002
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by mach1killa:
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by mach1killa:
did you buy your car off a guy name steven?
Yes.
Would you by chance be his friend that has the stock mid pipe?
I never got around to calling him back about it
stock mid pipe? did he give you 2 intercoolers?, because when i sold him the ported blower i left mine attached and he was suppose to give me his.
You must be Rory then???
No he did not give me another i/c ![[Frown]](frown.gif) and yes he said a buddy of his had the stock mid-pipe for the car at his garage in San Leandro.
I believe you also may know a buddy of mine Ron. He has/had a 2G Talon recently but may have sold it. I'm best friends with the guys that did the wrok on the Talon
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
congrats man! any chance of selling your steig?
--------------------
2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by Lilghoust:
congrats man! any chance of selling your steig?
I was actually just about to post it in the for sale section along with the 2.8 Steeda upper and Aux. idler.
Pm me so we can discuss it
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by jayl:
how many lbs of boost were you seeing ?
Just to let ya know i checked and it read a solid 17psi.
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
