Author
|
Topic: foxbody seat choices
|
Aztec 5.0
¯
Member # 13859
|
posted
What other year seats can I swap into my 90 GT? Looking for something that will bolt right in without having to spend a bunch. Not into the race seats, just looking to see if other year mustang seats will work. Thanks
Posts: 164 | Registered: Nov 2014
| :
|
|
Wht86drop
¯
Member # 12104
|
posted
Any year straight bolt in. How i know? Ive had sn95 seats in my car and new edge. No issue besides the wiring for power drivrs seat. Not hard at all to wire up though
-------------------- Jalapeña Red 86 GT Vert Yellow 72 Chevelle Rio Red 97 Cobra
High-Output Generations CC
Posts: 1669 | From: East Palo Alto, Fiji Islands | Registered: Jun 2012
| :
|
|
LXjames
¯
Member # 10791
|
posted
79-04 seats all direct swap even rails? I believe should be the same. From what I've heard new edge seats have the most comfort and more bolstering to keep you in the seat
-------------------- On Point Motorsport prez. King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
01 Bullit, 01 Cobra, 03/04 Termi and 03/04 Mach all came with really nice seats. 85/86 sport seats are nice too, but lack support and have the same ganster lean problem as any other fox seat until you reinforce the frame. [ 2015-07-20, 04:58 PM: Message edited by: CAMD FOX ]
-------------------- "The clutch is on the left. Gas on the right." "What's this one in the middle?" "It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
Aztec 5.0
¯
Member # 13859
|
posted
Cool thanks guys. The seats in it are solid but the driver side has a 6"rip in the vinyl. Just weighing my options on having it fixed or finding different seats that are more comfortable
Posts: 164 | Registered: Nov 2014
| :
|
|
Wht86drop
¯
Member # 12104
|
posted
What kind of seats do you have?
-------------------- Jalapeña Red 86 GT Vert Yellow 72 Chevelle Rio Red 97 Cobra
High-Output Generations CC
Posts: 1669 | From: East Palo Alto, Fiji Islands | Registered: Jun 2012
| :
|
|
|
Aztec 5.0
¯
Member # 13859
|
posted
I have the stock tweed on vinyl in grey or titanium
Posts: 164 | Registered: Nov 2014
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
sn95 and new edge seats all raise the seat bottom by nearly 3/4" when bolted into a foxbody.
So unless you're a midget, they aren't exactly a true direct swap, and require fab work to the seat brackets to lower them down.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Marks93
¯
Member # 11130
|
posted
I installed the '04 Cobra seats and love them. They did raise me up a little bit. I'm 6' tall and still have plenty of room above my head. Had to create an electrical plug to get the electrics working but it's fairly easy!! Must be if I did it!!
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
Aztec 5.0
¯
Member # 13859
|
posted
3/4" raise in seat height would be good for me cuz I'm short and I don't have tilt. Are all the othe options power cuz I don't want to deal with paying someone to wire it up
Posts: 164 | Registered: Nov 2014
| :
|
|
Marks93
¯
Member # 11130
|
posted
The ones I bought were power and like I said, it was pretty easy to make a mini-harness and hook it up. If they're like mine, don't pay anyone to wire them up. I'll give you a hand.
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
you can also just bolt your stock foxbody manual seat rails to the newer seats and they will bolt into your foxbody and work just like your old manual seats
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Aztec 5.0
¯
Member # 13859
|
posted
Blind>> is that a straight unbolt and bolt on to the new seats?
Posts: 164 | Registered: Nov 2014
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
fox track bolts right onto sn95 seats.
havent tried s197
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Wht86drop
¯
Member # 12104
|
posted
Fox tracks work on S197 seats. You need to drill a hole on each side to make them fit. I know a member here that has tan ones in his 89 coupe. They look nice specially with the sn95 dash.
-------------------- Jalapeña Red 86 GT Vert Yellow 72 Chevelle Rio Red 97 Cobra
High-Output Generations CC
Posts: 1669 | From: East Palo Alto, Fiji Islands | Registered: Jun 2012
| :
|
|