Author
|
Topic: Once again AED Does Great Top Notch Work
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
So As Most of you know my Beast has been at AED for a couple months now. i was having a slight issue with my upgraded Fuel System at low RPMs on the Returnless Fuel System with kenny bell Boost A Pump with Dual Walbro pumps. What we ended finding out after lots of Data logging an Retunning, even Change Fuel pumps again to the new Steath 340s. Was that the Fuel pumps were spiking and driving at low RPMs an the O2 sensors could not correct fast enough at low RPMs, which caused lag/light bucking/sputter with a slight missfire. So what Shaun At AED thought was going to a Return style Fuel system but keeping the KB BAP an stock FPDM active to Fix the problem. So I ended up going with a AED Custom Return Style Fuel system That Drew installed, very Beautiful Setup Very very Clean. in the Process We found that the Inertia Switch which cuts off fuel was broke some how. Drew at AED took care of the Ford Warrenty work for me on the new Inertia Switch. so it cost me nothing since the car is still under the 3yr/36k. Also while the car was there i had Drew install a BMR K Member with BMR A arms. After all was done Shaun Spent All the time needed to get the Tune 100% on both Pump 91octane and E85.The car runs great now. nice an smooth. the BMR setup didnt add much NVH, very little Notice in NVH.
ONCE AGAIN HUGE THANKS TO THE TEAM AT AED, SHAUN, DREW, and DREWS BROTHER. best part was when i picked up the car it was all detailed an very clean just the way i like the car to be all the time. . Also during the whole process AED kept me updated the whole with either phone calls, Txts, an Pictures, you cant beat that Service.
stock broken Inertia Switch which cuts off fuel
The new parts for the AED custom Return style Fuel System
Stock Kmember Full weight of my GT500 with half tank of gas no one in car
BMR Kmember with A arms Full weight of my GT500 with half tank of gas no one in car
My car matches AED colors
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
turbo50
¯
Member # 6700
|
posted
Nice! Always great to have your beast back and 100% !!!!
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
quote: Originally posted by turbo50: Nice! Always great to have your beast back and 100% !!!!
yes it is.
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
DEVERO2
¯
Member # 6155
|
posted
I was in the shop and I saw your car sitting on the rack. Drew's brother told me what it was and it looked like a pretty trick set up and will all be hidden by the fender. Clean install for sure. Good looking car.
Posts: 641 | From: sacramento | Registered: Oct 2005
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
quote: Originally posted by DEVERO2: I was in the shop and I saw your car sitting on the rack. Drew's brother told me what it was and it looked like a pretty trick set up and will all be hidden by the fender. Clean install for sure. Good looking car.
thanks, it really nice cause its all hidden even the fuel rails blend in cause there black.
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
Boss 327
¯
Member # 9143
|
posted
Looks good
-------------------- "You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito
Posts: 1789 | From: East Bay | Registered: May 2009
| :
|
|
ISP89LX
¯
Member # 8949
|
posted
-------------------- 89LX Turbo50built!!! Wait, he jacked my shit!!! "Dan will make It rite" THIEF!
Posts: 2997 | From: Nowhere to be found. | Registered: Feb 2009
| :
|
|
Gnari-Garage
CAFords OG
Member # 3164
|
posted
Nice Job again, AED!
-------------------- 2017 McLaren 570GT 2019 Audi S5 2017 Tundra 7" Lift, 37" Tires
Posts: 4017 | From: 916-sacramento | Registered: Aug 2003
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
Thanks guys. I highly recommend AED for any work you can't do at home
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|
turbo50
¯
Member # 6700
|
posted
Again, nice job and you lost 28lbs!
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Allen that's sick bro. When I put a real fuel system in the car I will probably go the same route. Clean install too
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
Beastly GT500 TVS
¯
Member # 9723
|
posted
quote: Originally posted by 50 Deep: Allen that's sick bro. When I put a real fuel system in the car I will probably go the same route. Clean install too
Thanks bro just hit a 10.90 on 2nd pass ill post later.
-------------------- 91/E85 tune by SHAUN AT AED 700HP/700TQ ON E85 10.78@129MPH 1.644 60FT
WWW.AEDHP.COM
Posts: 893 | From: 707 | Registered: Jan 2010
| :
|
|