Author
|
Topic: Here you go guys. how to check PTV
|
Pure Stang
¯
Member # 7251
|
posted
alot of people dont know how to do this, so i though this would be nice to post
http://www.youtube.com/v/TZ6kSbsED7I&rel=1
-------------------- HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother. 04/24/87 - 11/23/2012
90 lx 347 RIP 86 gt 89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
i know how to do it. but this is a good video!
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
good video, but that is not a very good way to put the clay on the pistons. You need to cover the entire valve relief area. Most of the times when swaping to bigger valve size heads(which is what we do the most)and bigger cam, the piston to valve clearence issue is not in the middle were they put the clay. It is usualy on the very outside edge of the relief and can extend out towards the far edge of the pistons. I make sure and cover the reliefs and maybe a 1/4 inch around them with clay and don't leave it in a big ball.It maybe sticks up 1/4 above piston before I start the check. FYI [ February 06, 2008, 02:27 AM: Message edited by: 2stangs69-91 ]
-------------------- 69 Mustang on hold 1991 LX hatch getting a make over 1994 F150 4X4 351 2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|