|
Author
|
Topic: New Numbers!!
|
stangless
¯
Member # 1414
|
posted
 
 
First of all, I would like to profoundly thank RPM Automotive Services for the patience and diligent work they did today. I've been to numerous shops, dyno places etc and this place is by FAR the one that's treated me the best.. they have a very knowledgeable staff. I talked to a couple of their employees and they advised e how to proceed for future combos etc etc. ![[patriot]](graemlins/patriot.gif)
Anyhow.. getting back to my topic., Numbers.... right off the freeway i got a 270 rwhp and 262 rwtq. the car was having issues pulling passed 4k. Brad and Martin checked all the mechanical components and after some deliberation and fine tuning i got a 273 rwhp and 286 rwtq. torque went way up(289 on one of the runs) ![[Wink]](wink.gif) .. and gained more than 20 hp through the midrange ![[dance]](graemlins/dance.gif) .
Pretty happy with the numbers.. i think the cam is keeping me from making power because no matter what they tried the car would start losing power at 5.5k rpm.
what do u guys think could be causing this?
Anyhow.. we tried the 80 shot and the car was running lean.. so we changed the fuel jet to the one for 125 and the car run a bit rich. pretty much a a/f mix of 12 going across the board.
I decided to keep it there and sacrifice hp for safety.. it made 333 rwhp and 331 rwtq.
didn't have the guts to try the 125 shot..
I will in the future.. but i just want to do the best i can with the numbers i have.
Once again, thanks to RPM for the great service and their diligence for putting up with dozens of repetitive questions ![[Razz]](tongue.gif) .
[ January 07, 2006, 03:25 PM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
 .
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Fostang
¯
Member # 3752
|
posted
That a nice looking coupe. How many miles on the beast?
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3013 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
evintho
¯
Member # 5536
|
posted
Yeah, Brad and Martin rock! RPM did my Dodge a few years back. They even sponsored a dynoday for my old Mopar car club. Good people!
--------------------
'89 Mustang LX droptop running a turbocharged 2.3, and proud of it!!
Check out 'Thunderstang'!
Posts: 285 | From: Santa Rosa | Registered: Apr 2005
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by Fostang:
That a nice looking coupe. How many miles on the beast?
it's a season 93 block.. it's got about 110k miles ![[Frown]](frown.gif) .. the car is a 91 former 4cyl.
Can't wait to hit the track!!
yeah, good people indeed.. make you feel right at home. ![[Whoo Whooooo!]](graemlins/woowoo.gif)
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
castor
¯
Member # 2765
|
posted
my guess was 275...what'd i win?
Posts: 1457 | From: San Francisco | Registered: Apr 2003
| :
|
|
Impact 5.0
¯
Member # 2805
|
posted
Jerzy thats awsome man, congrats, I know how you have been stressing about this.
Posts: 2173 | From: Tracy, CA | Registered: May 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by castor:
my guess was 275...what'd i win?
quote:
Originally posted by castor:
my guess was 275...what'd i win?
you were close.. but.. this guy was closer overall..
quote:
Originally posted by losbadgts:
jersey i think u will get 276rwhp/286tq and 332 rwhp with the 80 shot. ![[burnout]](graemlins/burnout.gif)
What do u want carlos? bottle of water or a cup of water?
Craig.. yeah.. i'm glad to get it out of the way..
When do we get to race again?
Before i forget.. since i'm in thanking mode.. i also wanted to thank Brandon(silverlx) for doing the conv and putting the thing together.
[ January 07, 2006, 01:01 AM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
quote:
Originally posted by Jmir018:
.
And the best computer remover in the shop
Can't wait to see "you" ( ) try to hook up 330+ at the wheels ![[worship]](graemlins/worship.gif)
Congrats Jersey
--------------------
R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by hidnn.o.s.:
quote:
Originally posted by Jmir018:
.
And the best computer remover in the shop
Can't wait to see "you" ( ) try to hook up 330+ at the wheels
Congrats Jersey
yeah, that guy was talented..
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
quote:
Originally posted by evintho:
Yeah, Brad and Martin rock! RPM did my Dodge a few years back. They even sponsored a dynoday for my old Mopar car club. Good people!
I see a dyno day for us all here coming in the near future ![[Big Grin]](biggrin.gif)
--------------------
R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
carajo
¯
Member # 4426
|
posted
nice coupe,btw
where is RPM at,
how much did they charge you,
how many times did they run the car on the dyno?
you gained 20 hp in the midrange,was it chipped or just timming/fuel pressure ajustments?
sorry for all the q`s,just thinking about doing that to my car.
--------------------
06 magnum srt8 6.1
05 f250 lifted
94 gt wait till you see me!
Posts: 1468 | From: hate`n in richmond | Registered: Apr 2004
| :
|
|
5.t0es
¯
Member # 5864
|
posted
ha i was almost exact with hp congrats
Posts: 2990 | From: eb | Registered: Jul 2005
| :
|
|
CobramanPhil
¯
Member # 2170
|
posted
Hey...I guessed 335rwhp in your other post!!! Only 2rwhp off!!!!! Was I closest out of everyone??????????
--------------------
2013 Shelby GT500
2011 Porsche 911 TurboS/AWD
2014 GSXR750
2002 GSXR750 Track Beater Bike
2016 Explorer Unlimted
Posts: 1016 | From: California, Bay Area | Registered: Dec 2002
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
Nice looking coupe, what do you think you'll be running?
--------------------
87 Fox- Restoration in progress
2014 Tacoma DCLB MGM
2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
losbadgts
¯
Member # 4394
|
posted
quote:
Originally posted by Jmir018:
quote:
Originally posted by castor:
my guess was 275...what'd i win?
quote:
Originally posted by castor:
my guess was 275...what'd i win?
you were close.. but.. this guy was closer overall..
quote:
Originally posted by losbadgts:
jersey i think u will get 276rwhp/286tq and 332 rwhp with the 80 shot.
What do u want carlos? bottle of water or a cup of water?
Craig.. yeah.. i'm glad to get it out of the way..
When do we get to race again?
Before i forget.. since i'm in thanking mode.. i also wanted to thank Brandon(silverlx) for doing the conv and putting the thing together.
Fuck the water, i want u to get down on your knees
just like this
Cant wait to get my head work and cams to put in so i could smoke u. Well i think i could since i have a bigger shot of nitrous
--------------------
Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
Hungry Hippo
¯
Member # 537
|
posted
is this an auto or a mustang dyno?
--------------------
05 S4 Avant(wagon)
09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
wow, your pipes hang really low, is that supposed to be a cobra catback or something?
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by carajo:
nice coupe,btw
where is RPM at,
how much did they charge you,
how many times did they run the car on the dyno?
you gained 20 hp in the midrange,was it chipped or just timming/fuel pressure ajustments?
sorry for all the q`s,just thinking about doing that to my car.
RPM Automotive Services is located in Rohnert PArk 707-584-8230 (about 10 minutes south of infineon raceway) well worth the drive and $$ if you ask me. one of those hidden treasures that not a lot of people know about.. they been in business for a looong time and have tuned hundreds if not thousands of cars.
they do it all, i was just in the Dyno section of their shop, but after a little tour i realized how big they really are.. they do all types of maintenance work , performance modifications and engine building.
I guess the price will be different for eveyrone depending on whether you have a chip already and just need a tune or whether you need both. I would give them a call.
They ran the car in the dyno. i lost count, over ten times easily.
He got the correct air/fuel ration on his first try though. after that it was all a matter of adjusting the timing, fuel etc, etc.
[ January 07, 2006, 03:20 PM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
quote:
Originally posted by blind:
wow, your pipes hang really low, is that supposed to be a cobra catback or something?
BLind, i don't even know. i purchased this exhaust system a long ass time ago.. it's a used bassani x pipe and flowmaster catback.. from what I've heard from everyone (muffler shops,friends)is that the catback was improperly welded together. if i have it sitting in the appropriate place then it will hit the frame and rattle. Since don't care about looks. i just had them put it where it would not rattle.
Edit: i just remembered that the guy that sold me this said that the catback was welded for a gt. ![[Confused]](confused.gif)
[ January 07, 2006, 12:27 PM: Message edited by: Jmir018 ]
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by Jmir018:
quote:
Originally posted by blind:
wow, your pipes hang really low, is that supposed to be a cobra catback or something?
BLind, i don't even know. i purchased this exhaust system a long ass time ago.. it's a used bassani x pipe and flowmaster catback.. from what I've heard from everyone (muffler shops,friends)is that the catback was improperly welded together. if i have it sitting in the appropriate place then it will hit the frame and rattle. Since don't care about looks. i just had them put it where it would not rattle.
Edit: i just remembered that the guy that sold me this said that the catback was welded for a gt.
oh it was probably bent up for a gt to have the pipes hang under the gt bumper, that would explain it
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
92stangLX
¯
Member # 3252
|
posted
Post your dyno graph. It would be interestin to see the curve. Is that a Street Heat or Track Heat intake?
The intake could be limiting the power band.
Nice car and nice numbers
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
it's a track heat.. i don't have the dynograph or i would have posted it..
Being the genious that i am.. i requested a floppy disk forgeting i don't have a floppy drive at home.
i'll try posting them on monday.
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
hidnn.o.s.
¯
Member # 1219
|
posted
Anyone interested in a tune, chip, or just duno runs feel free to give Brad at RPM a call, (707) 584-8230. Let him know you heard about RPM from this site, me, or Jersey and I assure you he will take good care of you.
Goodluck on your test Jersey
[ January 07, 2006, 02:53 PM: Message edited by: hidnn.o.s. ]
--------------------
R.I.P. Willie G. You are missed on this forum
Posts: 15950 | Registered: Apr 2002
| :
|
|
cdog301
¯
Member # 5136
|
posted
congrats! A cool looking coupe man!
--------------------
1992 Notch
Dss Pro Bullet
Afr 165's
GT40 U/L
Bassani X w/cats
and other goodies!!!!!!!
I love MOSTLY MUSTANGS OAKLAND CA
Posts: 386 | From: Richmond CA | Registered: Dec 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
