T O P I C R E V I E W
|
Blow_U_In_Reverse
Member # 12298
|
posted
Which cam is better for boost? a f303 or a trickflow stage 1?
8.5:1 compression with a procharger pushing 10psi boost..
I know a custom cam is better, and there are better cams, etc.. but i just want to know which one is better between these 2??
-FiJi-
|
i
Member # 12534
|
posted
F cam
|
Tom Renzo
Member # 13165
|
posted
Both of those cams are extreamly close on specks. But i would suggest the STAGE 1. But the 303 is a very good choice for a winded motor.
|
sleeping stallion
Member # 8162
|
posted
F cam here I'm on low boost making decent power
|
Venomousnotch
Member # 8695
|
posted
F cam FTMFW....
|
Built88LX
Member # 10758
|
posted
I would go with F cam if it were my choice
|
racsirx
Member # 1710
|
posted
F303 cam or tfs stage 2 cam, the tfs stage 2 is the same as Anderson B4 cam which anderson use to say was their blower cam, there are better cams than e303 cam or tfs stage 1 cam
|
Blow_U_In_Reverse
Member # 12298
|
posted
yeah i know there are WAAAAY better cams, but at the moment im just gonna go with one of these since i have both.. im leaning towards the f303 after reading all the feedback..
|
2BlueGeeTees
Member # 4702
|
posted
Seeing as you have both, if you we're to sell both you could easily make the money for a custom cam
|
Blow_U_In_Reverse
Member # 12298
|
posted
quote: Originally posted by 2BlueGeeTees: Seeing as you have both, if you we're to sell both you could easily make the money for a custom cam
Im kind of a hoarder haha but i really dont wanna get a custom cam until i do the complete build i want.. this is just gonna be a "feeler" setup to be honest..
|