This is topic E303 camshaft in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=030207

Posted by clasics4now (Member # 9024) on :
 
Input needed.
E303 cam on stock 302 block with stock heads, roller rockers, push rods and lifters???
Good idea??

Thanks in advance

[ 2021-07-22, 07:00 AM: Message edited by: Under Construction ]
 
Posted by 166 Merlo (Member # 1549) on :
 
Keep the stock cam, or do the heads n an xcam
 
Posted by 2BlueGeeTees (Member # 4702) on :
 
+1 on keeping the stock cam in this situation. All you will really end up with is a little lope in your idle and no real measurable performance gain. Save your time, money, and effort on a good heads, cam, intake setup.
 
Posted by clasics4now (Member # 9024) on :
 
Thanks, y’all.
 
Posted by BRB 50 (Member # 10395) on :
 
Good heads with stock everything else will make you feel an improvement. Whatever heads you do better than stock, will add power. GT40s work but you can get more. Do heads then the rest. Hard stuff out the way and everything else gone be butta
 
Posted by CLEEN 50 (Member # 5867) on :
 
quote:
Originally posted by clasics4now:
Input needed.
E303 cam on stock 302 block with stock heads, roller rockers, push rods and lifters???
Good idea??

Thanks in advance

If the car is an AOD, IMO it is worth the upgrade if you're willing to freshen up the surrounding accessories and add a set of 4.10s. I don't think the upgrade alone is worth it unless you're seeking the sound.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com