This is topic Oil in intake in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=030137
Posted by Blown93Snake (Member # 94) on :
 
Setup in sig.. why am I getting so much oil in my intake?? ugh..

Lower to upper gasket is suspect..

PCV is new.. after only a handful of miles.. intake has nice puddle of oil..

If I pull the front off the RPM intake, I see well, yeah.. oil.. .normal???

Need to get a 2nd pcv setup?

Thx
 
Posted by Martinna (Member # 12493) on :
 
Oil in your upper intake? Is your crank case pressurizing? An oil dipstick that pops out or almost pops out is one sign of a pressurized crank case.
 
Posted by 4IDFOX (Member # 9921) on :
 
Boost + pcv = oil in the intake.

Better get to doing some research. It is controllable.
 
Posted by Blown93Snake (Member # 94) on :
 
quote:
Originally posted by 4IDFOX:
Boost + pcv = oil in the intake.

Better get to doing some research. It is controllable.
Vortech isn't on the car atm.. .my bad lol.

All motor.
 
Posted by Blown93Snake (Member # 94) on :
 
My pop says its bc i have a 7 qt oil pan..and its letting oil up into my intake...bc no windage tray

And that nothing is wrong..no boost.. and yes you can run boost + a pcv lmfao..did it on last cobra no issues haha

[ 2018-10-22, 07:50 PM: Message edited by: Blown93Snake ]
 
Posted by Blown93Snake (Member # 94) on :
 
quote:
Originally posted by 4IDFOX:
Boost + pcv = oil in the intake.

Better get to doing some research. It is controllable.
What would you suggest?

Seeing some block off the PCV and run a breather.. some run a dual pcv off the driver side valve cover and stock location..

I put the vortech back on.. drove about 50 miles, had like 1/4 qt of oil in upper intake.. not good...
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com