This is topic which axle seals for 31 spline 8.8? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=030012

---

Posted by 510Notch (Member # 9353) on :
 
im using 31 spline axles that are larger diameter then the factory 28 spline.

what axle seals do I use for my factory 8.8 housing (90 mustang)

Yukon Axle part# - YA F750011

....google was not my friend on this one

thanks

[ 2017-05-08, 01:34 PM: Message edited by: 510Notch ]
 

---

Posted by NEIGHT (Member # 8741) on :
 
Edit: Sorry I read the question wrong.

[ 2017-05-08, 01:53 PM: Message edited by: NEIGHT ]
 

---

Posted by 4IDFOX (Member # 9921) on :
 
More importantly. What bearings are you going to use ?
I bet stock will be what you need.
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
I believe the axle seals and bearings are the same, since the diameter of the shaft where the bearing rides on is the same
 

---

Posted by ford521 (Member # 14321) on :
 
Yes the bearings and seals are specific to the 31 spline ...just did them in a 2013 GT500. Have your parts guy look them up for that vehicle...I got mine from Ford dealer
 

---

Posted by NEIGHT (Member # 8741) on :
 
This is all I could find, hope it helps.

https://www.yukongear.com/partslist.aspx?SearchMode=Diff&TypeID=4&Type=Ford&DiffID=276&DiffName=Ford+8.8%22+-+31+Spline&CatID=159&CatName=Axle+Seals+-+Rear
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com