This is topic Notchback became grenade in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=030000
Posted by V3T HNTR (Member # 11618) on
:
So I'm cruising and all of a sudden this LOUD clinking metal noise...I have a video for you guys to listen. Most recent work done was new flywheel and clutch. Clutch has 340 miles on it....
http://s587.photobucket.com/user/lopezckm02/media/DJ%20Gear/FBAFFD90-469F-4277-9D32-07DBB4744154_zps9gbayvxx.mp4.html
Posted by 89bluenotch (Member # 7454) on
:
Hard to tell from the video. Does it come from a specific side? I would pop off the valve covers and take a look.
Posted by V3T HNTR (Member # 11618) on
:
Negative, kind of comes from all sides honestly. Hard to tell. I have a feeling it's related somehow to flywheel/starter. It literally sounds like a metal bolt just getting tossed around inside the tranny...
Posted by V3T HNTR (Member # 11618) on
:
Thanks for the feedback though bluenotch
Posted by naked5.0notch (Member # 14058) on
:
When the flywheel was replaced was loc tite used on the fly wheel bolts ? Did all of the bolts on the flywheel and pressure plates get torqued to spec ?
Posted by V3T HNTR (Member # 11618) on
:
Took the car to a shop for the clutch and flywheel work, taking it back this morning. Will keep this thread posted with updates.
Posted by naked5.0notch (Member # 14058) on
:
oh ok cool, hopefully its not too serious
Posted by 70stang351w (Member # 9948) on
:
Any update?
Posted by V3T HNTR (Member # 11618) on
:
Ignore the typos, here's the word I just received.
We took off the Intake 2 injectors are dropping way too much fuel so it's creating a misfire in two cylinders all of I don't see anything loose in there the cars gonna have to go back to the place that tinned it for you to see why there's an open loop on the injectors or try to retune again
Posted by V3T HNTR (Member # 11618) on
:
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/C91E215B-2AB7-4EEB-88D2-B2AAE2F2CE8F_zpswtydukg7.jpg
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/8A41783B-DBEE-421C-8CEC-03BB95F9373B_zpscjt82bqs.jpg
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/D770015C-A3C8-485D-961C-2EA9D1BCC027_zpsz0hrvfl1.jpg
[ 2017-04-29, 05:26 PM: Message edited by: V3T HNTR ]
Posted by Martinna (Member # 12493) on
:
Take a long rubber hose, like a few feet of an old garden hose or heater hose and put one end to your ear. Place the other end by places where you think the noise is coming from.
Posted by V3T HNTR (Member # 11618) on
:
Wanted to update this thread, the problem was the stud that hold the roller rocker broke causing the loud pinging. Little metal piece being thrown around. Nothing else was damaged. Replaced all studs with new ARP and good to go!
Posted by 70stang351w (Member # 9948) on
:
thats good was wondering what ever happened
Fueled by Ford Mustang Owners
on CaliforniaFords.com