This is topic Put new doors on fox Convt ..??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029868

---

Posted by Bottle Fed (Member # 2686) on :
 
Installed new doors a year ago on my fox Convt and went back to wire it up this week, can't seem to get power to it. I plugged the main harness back in and wired up the speakers, checked the fuse, what am I missing.....????

Thanks
Paul
 

---

Posted by KevinK (Member # 9234) on :
 
What's not working? Locks? Window? Mirror? Speakers?
 

---

Posted by Bottle Fed (Member # 2686) on :
 
Everything, obviously it's not getting power on both sides but I thought plugging it back in was all I had to do...guess I missed something but reaching out to c what other clues I can come up with
 

---

Posted by KevinK (Member # 9234) on :
 
Ok, let's start with the power locks. Both left and right power door locks get 12 volts from the circuit breaker by the black wire with a whit stripe. There should be power at all times.
 

---

Posted by Bottle Fed (Member # 2686) on :
 
Thanks Kevin I'll start with that
 

---

Posted by KevinK (Member # 9234) on :
 
Actually, power locks, power windows and seat
Lumbar all come from the same circuit breaker. The circuit breaker is fed from the battery side of the starter relay.
 

---

Posted by Bottle Fed (Member # 2686) on :
 
maybe that's where I messed up....redid a lot of the wiring on the firewall, hopefully it's there
 

---

Posted by Bottle Fed (Member # 2686) on :
 
KevinK, tried swapping the circuit breaker with another one I had, still nothing...checked voltage at the solenoid and it's getting power and checked the circuit breaker and it's getting power too...the fuses looked ok, what else is there???
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com