This is topic Flowtech heads in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029515
Posted by 69stangin (Member # 5609) on
:
Anyone ever use them and If so what was your experience ?
Thanks
Posted by *Als50* (Member # 6003) on
:
Save your money.
Posted by 69stangin (Member # 5609) on
:
http://www.racingjunk.com/Heads/182484082/Ford-Racing-302-X-GT40-aluminum-New-.html
What about those ? And get them milled down to 64cc
Posted by *Als50* (Member # 6003) on
:
Go with those. They're Ford Racing Heads that came in 2 different cc's. The 58cc and 64cc. No need to get them milled if the 64's are purchased.
[ 2015-05-08, 06:38 PM: Message edited by: *Als50* ]
Posted by 69stangin (Member # 5609) on
:
Talked to the guy and he said they are 66cc heads ?? I didn't know they made them
Posted by *Als50* (Member # 6003) on
:
They're still made. Bought a pair in '07 that Carajo slapped on. I spent almost 1g back then for the set.
Posted by 69stangin (Member # 5609) on
:
http://m.ebay.com/itm/141660534051 What about these ?
Posted by *Als50* (Member # 6003) on
:
Ford Racing 302/351W Turbo Swirl Aluminum Cylinder Heads 64cc M-6049-X306 $559.57 Summit Racing.
Posted by 4IDFOX (Member # 9921) on
:
quote:
Originally posted by 69stangin:
http://m.ebay.com/itm/141660534051 What about these ?
Those are pro comp. pretty much the same casting as all the cheap aluminum heads. And most have less than desirable springs.
Fueled by Ford Mustang Owners
on CaliforniaFords.com