This is topic which ball joints for D&D tubular a-arms 96-04 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029511
Posted by Just_a_GT (Member # 10372) on
:
I have some D&D motorsports tubular a arms for a 96-04. The stock replacement ball joints are similar in diameter but they are taller as in the bottom part of the ball joint. As if the stock replacement ball joint once pressed in will stick out from the bottom of the a arms about 1/4 of an inch. The old ball joint i took out sits flush with the bottom of the a arm
Does anyone have any experience with these a arms?
[ 2015-05-07, 06:26 PM: Message edited by: Just_a_GT ]
Posted by lubedealer (Member # 13499) on
:
just read your delema on these balljoints. i have found if you ever need any suspension part i always go to rareparts.com if they dont have it they can make. call and ask for glen in tech support. they have the best web page to browse through well good luck
Fueled by Ford Mustang Owners
on CaliforniaFords.com