This is topic Can you use the rack from a fox on 66 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029439
Posted by 50Reasons (Member # 6452) on
:
Just like the title says can you use a power steering rack from a fox body on a 1966 Mustang I will be using a AJE k member
The motor may be at Terminator or a coyote 5.0
Posted by 70stang351w (Member # 9948) on
:
http://www.hotrod.com/how-to/engine/1322-coyote-engine-swap/
that would be sic would like to put a shelby 350 motor in my 70
Posted by wilit (Member # 3367) on
:
Short answer, no. There's lots of power R&P retrofit kits out there and as far as I know, none of the power kits use a Fox rack. The R&P setup I have in my '68 uses the rack out of a 90's something Chevy Beretta. There's a guy with a website that did a junkyard R&P using a Taurus power R&P.
Posted by 50Reasons (Member # 6452) on
:
quote:
Originally posted by 70stang351w:
http://www.hotrod.com/how-to/engine/1322-coyote-engine-swap/
that would be sic would like to put a shelby 350 motor in my 70
Wow thanks for this link this helps a lot
Posted by 5.0 LsX (Member # 10017) on
:
AJE k member & front steering kit does use the fox rack. you will need the whole kit, and utilize sn95 front spindles. check out aje's website...
Posted by 50Reasons (Member # 6452) on
:
quote:
Originally posted by 5.0 LsX:
AJE k member & front steering kit does use the fox rack. you will need the whole kit, and utilize sn95 front spindles. check out aje's website...
Yes I know that I wanted to supply my own rack and spindles as I have these parts already to save a few bucks and to see if compatable with the Koyote or termi motor
Fueled by Ford Mustang Owners
on CaliforniaFords.com