This is topic Auto to manual transmission question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029207

Posted by in4thewin24 (Member # 13648) on :
 
I have found a deal on most the parts I will be needing to do the swap; but want to confirm something before finalizing. My car is an automatic car, so is it correct that since this is so I would not need the manual transmissions computer? Also it is missing the manual transmissions wiring harness; do I need this? Thanks any help is appreciated.
 
Posted by NEIGHT (Member # 8741) on :
 
You need both.
 
Posted by rollininmy50 (Member # 9067) on :
 
+1
 
Posted by Wht86drop (Member # 12104) on :
 
I've seen people use auto computers in a manual no problems. Manual transmission harness you do need. Also the oxygen sensor harness needs to be changed if I remember correctly.
 
Posted by i (Member # 12534) on :
 
Don't forget the harness for the reverse tail lights!
 
Posted by MUSTTANGUY (Member # 2251) on :
 
I have reconditioned transmission harnesses available w/ reverse jumper harness included.
 
Posted by hurting your feelings (Member # 13641) on :
 
quote:
Originally posted by NEIGHT:
You need both.

An you would be wrong.
 
Posted by SIC9250 (Member # 8216) on :
 
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by NEIGHT:
You need both.

An you would be wrong.
This.
 
Posted by SLOW95GTS (Member # 10365) on :
 
the a9p computer will work for a manual car.
 
Posted by NEIGHT (Member # 8741) on :
 
quote:
Originally posted by SIC9250:
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by NEIGHT:
You need both.

An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
 
Posted by hurting your feelings (Member # 13641) on :
 
quote:
Originally posted by NEIGHT:
quote:
Originally posted by SIC9250:
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by NEIGHT:
You need both.

An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
Can use a auto ecm. An you can jump the neutral safety switch.

If you use 5sp ecm you have to change the 02 harness.
 
Posted by fredfifty (Member # 10320) on :
 
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by NEIGHT:
quote:
Originally posted by SIC9250:
quote:
Originally posted by hurting your feelings:
quote:
Originally posted by NEIGHT:
You need both.

An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
Can use a auto ecm. An you can jump the neutral safety switch.

If you use 5sp ecm you have to change the 02 harness.

What would be the jumper wire placement on the sensor side of the harness?
 
Posted by WANARNM (Member # 587) on :
 
I left the aod computer and jumped the Neutral safety switch . I rigged my reverse light sensor by cutting up the molding around the cables . Just as a quick fix. It worked. But I would eventually purchase one. They not that much. Good luck.

[ 2018-08-09, 10:30 PM: Message edited by: WANARNM ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com