This is topic Rear sway bar mounting bolts? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029120
Posted by 510.86.notch (Member # 9892) on
:
What is the size of the rear sway bar mounting bolts.its a 89 mustang.thanks in advanced cafords.
Posted by Blow_U_In_Reverse (Member # 12298) on
:
http://www.latemodelrestoration.com/item/HDW-5772A/1982-04-Mustang-Rear-Swaybar-Hardware-Kit
or if you wana go to home depot or orchard supply its 3/8-16
[ 2014-08-01, 02:09 PM: Message edited by: Blow_U_In_Reverse ]
Posted by 510.86.notch (Member # 9892) on
:
Thanks.I could of got them from work but was not sure on size.thanks for the response.
Posted by Tom Renzo (Member # 13165) on
:
NOPE they are not 3/8-16 they are METRIC. I think they are 10x1.50. I could check but the kit posted above should work perfectly. If you need the exact size i will check Monday morning when i open the shop.
Posted by 510.86.notch (Member # 9892) on
:
quote:
Originally posted by Tom Renzo:
NOPE they are not 3/8-16 they are METRIC. I think they are 10x1.50. I could check but the kit posted above should work perfectly. If you need the exact size i will check Monday morning when i open the shop.
Thanks.if you could check that would be greatly appreciated.thanks.
Posted by Blow_U_In_Reverse (Member # 12298) on
:
quote:
Originally posted by Tom Renzo:
NOPE they are not 3/8-16 they are METRIC. I think they are 10x1.50. I could check but the kit posted above should work perfectly. If you need the exact size i will check Monday morning when i open the shop.
i needed sway bar bolts a while back for 91 vert.. 3/8-16 is the size of the bolt on my friends 89 hatch that i used for reference when I went to get new bolts, and it worked perfect on my car.. unless BOTH our cars were one of a kind?!
Posted by SwEeT03Gt (Member # 10283) on
:
if you need some i got mine i took off years go, free
edit got to make sure there still on the sway bar, but should be the same size
[ 2014-08-02, 10:40 PM: Message edited by: SwEeT03Gt ]
Posted by Tom Renzo (Member # 13165) on
:
Sorry you are 100% correct the early Mustang if stock are in fact 3/8-16 X 1 1/4. I checked my mustang this morning at the shop. Later models are Metric. Sorry i stand corrected!!
[ 2014-08-03, 06:16 AM: Message edited by: Tom Renzo ]
Posted by 510.86.notch (Member # 9892) on
:
quote:
Originally posted by Tom Renzo:
Sorry you are 100% correct the early Mustang if stock are in fact 3/8-16 X 1 1/4. I checked my mustang this morning at the shop. Later models are Metric. Sorry i stand corrected!!
Thanks.appreciate the correction.
Posted by RRRCobraSC281 (Member # 7086) on
:
just go to pick n pull $2 for the entry fee and just get them.
[ 2014-09-16, 10:26 PM: Message edited by: RRRCobraSC281 ]
Posted by 510.86.notch (Member # 9892) on
:
quote:
Originally posted by RRRCobraSC281:
just go to pick n pull $2 for the entry fee and just get them.
I get free hardware from work.so just needed the size.3/8 16 it is.
Fueled by Ford Mustang Owners
on CaliforniaFords.com