This is topic Will 1.6 crane cams rocker hit stock heigh valve covers ? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027777

---

Posted by 87 coupe (Member # 10919) on :
 
I kinda wanted to go with something not too tall
 

---

Posted by turbo50 (Member # 6700) on :
 
Just clearance them. Depends on rocker type. Stud mount, pedestal mount, cam lift etc.


Dan
 

---

Posted by dean-93 (Member # 9401) on :
 
my comp stud mounts clear but i had to remove the oil baffle and grind that area
 

---

Posted by 87 coupe (Member # 10919) on :
 
Mine are pedestals
 

---

Posted by nitrous_bob (Member # 77) on :
 
stock cam, ped mounts, 1.7 cobra's worked fine for me , stock valve covers, never touched the baffle
 

---

Posted by 87 coupe (Member # 10919) on :
 


Here's a pic of the rockers how big they look
 

---

Posted by 50DADDY (Member # 3076) on :
 
They will usually fit under the stock aluminum valve covers fine.You may have to remove the splash shields though.
 

---

Posted by turbo50 (Member # 6700) on :
 
Those aren't pedestal mount Jose
 

---

Posted by NEIGHT (Member # 8741) on :
 
They look like stud mount. Let me know how if you can get them to fit N stuff kuz I wanna use stock valve covers.
 

---

Posted by turbo50 (Member # 6700) on :
 
Easy, just grind the valve covers, remove baffle
 

---

Posted by 87 coupe (Member # 10919) on :
 
Shit sorry I ment stud mount what was I thinkin I was at work and didn't pay attention
 

---

Posted by 87 coupe (Member # 10919) on :
 
Do I grind on the flat side were the rockers are located and I Wana use after market valve covers stock high dough
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com