This is topic 01 mach1 engine into 01 mustang GT in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027631
Posted by 1sickEXchp1988 (Member # 11451) on
:
installing a 32 valve into a 2001 mustang gt(sohc)
and i need to get a wiring harness, read somewhere i can extend the harness but im sure im missing sensor for the pcv. any help or imput would be great. thank you
Posted by SwEeT 03 Gt (Member # 10283) on
:
i'll get u a write up hold on
edit its out of a linclon mark 8 but same as a cobra swap would be
http://www.moddedmustangs.com/forums/99-04/190648-infamous-lincoln-mark-viii-engine-swap-thread.html
[ October 26, 2012, 01:16 AM: Message edited by: SwEeT 03 Gt ]
Posted by colbysvt (Member # 11093) on
:
I know you would be missing the connector for the imrc controller so since it cant be smogged with that motor delete those pieces of shit while the motor is out
Posted by BTLD GT (Member # 5229) on
:
there are no imrc's on a any 99 an up cobra motor.
Posted by Broke4.6 (Member # 9085) on
:
best way to do it is make your own harness! What i did was bought an 03 cobra injector harness and converted the gt harness into a dohc harness! I think you bought my brothers motor out of his mach 1? if so i explained all this to you! lol
Posted by dohc90lx (Member # 11863) on
:
use a dohc engine harness, computer from a mach 1 have someone run pmi with ids software for you and your done. ooh, and it will smog just fine. put the cats for a mach 1 on it and make a appointment with the smog refferee to have everything checked. they will re issue a bar code to stick in your door jam stating the car is california legal.
Fueled by Ford Mustang Owners
on CaliforniaFords.com