This is topic does anybody know if theres a 351w lower intake made for a holley upper in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027409
Posted by sleeperz (Member # 11609) on :
 
thinking of going 351w on my fox. and would like to keep my holley systemax intake. does anyone know who sells a lower intake for 351w based motor looked on line and couldnt find one no were. dont even think those are made. does anyone know
 
Posted by Greasy (Member # 5258) on :
 
I don't think Holley makes one, but there is the GT-40, TFS-R plus the Box-R, Edelbrock Vic Jr and Super Vic in EFI. Probably a couple more out there but that's all I can think of right now.
 
Posted by racsirx (Member # 1710) on :
 
I can't remember, getting old, but doesn't the 351 truck lower work with a Holley upper?
 
Posted by Ric88Notch (Member # 11660) on :
 
yeah the 351 lower works with the holley upper. same pattern.

-
 
Posted by Nifty50 (Member # 9987) on :
 
quote:
Originally posted by Ric88Notch:
yeah the 351 lower works with the holley upper. same pattern.

-
Ric is right and you can find them on Ebay for $100-$200
 
Posted by sleeperz (Member # 11609) on :
 
I did went to pick n pull and looked on all 351trucks but they all had the lower intake like a stock 5.0 intake only found the matching one from a 302. I guess not all 351 trucks have it like a stock 5.0 intake then. Just gota keep looking on them trucks till I find one. Or go on eBay. Thanks guys
 
Posted by Duncan Motors (Member # 7045) on :
 
there will be one out there. unfortuntly the stock lower gets restrictive on the front two runners if u start pushing some air flow. a lil welding and porting can fix it tho.
 
Posted by samsbolt390 (Member # 11645) on :
 
That looks like the 302 intake on my bronco, the 5.8 looks similar but has tiny oval ports and also why I thought I would use a 5.0 lower with spacers plates for the 5.8 deck..? Am i Wrong? This intake would save me lots o trouble.
 
Posted by Duncan Motors (Member # 7045) on :
 
they have 2 versions in both motor sizes. u just weren't lucky your first looky at the junk yard. there are out there. get off the computer and go look again.
 
Posted by 50DADDY (Member # 3076) on :
 
Systemax upper DOES NOT match the truck lower.Its close,but not close enough in my opinion.Youd have to weld and work it to match up correctly.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com