This is topic HELP ME PLEASE CAN'T APPLY FULL THROTTLE in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024897
Posted by totalkaos92 (Member # 5750) on :
 
First off sorry for the new post, and not finding my old post...


Just can't get this sh!t right...

I have checked and changed everything I can think of, but I can't just give it full throttle. I have checked mass air, tps, ICs, dist, CPU, chip, puel, ECT and cans figure it out.

I can slowly apply gas and it halls ass but once it hits full throttle it gives out, and if im going slow and I floor it, it just stalls like there no gas to give

PM me your number if you have ever has a similar problem. [patriot]
 
Posted by SWEET03GT (Member # 10283) on :
 
did u change the fuel filter? if so what about the fuel pump maybe its going out
 
Posted by turbo50 (Member # 6700) on :
 
Pump suckin pickup in tank.
 
Posted by totalkaos92 (Member # 5750) on :
 
Forgot to mention...
Aeromotive system, with the 2 Holly pump setup, sumped tank with external pumps
 
Posted by turbo50 (Member # 6700) on :
 
Ground issue.

Check it all hightop!

computer, engine, injector harness. ETC
 
Posted by DIRTY SALLY (Member # 7845) on :
 
DID U check your dis? the pick up side could be bad

msd box problems?
 
Posted by 93ChpLuu (Member # 10787) on :
 
Yea I had a similar problem and it was the inside of the distributor that was broken..remove the cap and see if anything looks lose of broken...
 
Posted by Duncan Motors (Member # 7045) on :
 
sounds like a mass air. hook a scanner up to to it and see what the live data is open throttle?
 
Posted by turbo50 (Member # 6700) on :
 
What spark plug gap?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com