This is topic hp estimate and best cam in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023904

---

Posted by 8n0tch9 (Member # 10543) on :
 
im trying to figure out a ball park hp for my setup '89 stock 5.o bottem end edelbrock performer heads 2.02 valves edelbrock rpm airgap intake bbk longtubes 1 5/8 holley hp650 150 shot of juice and i dont no what cam to get yet any info
 

---

Posted by 8n0tch9 (Member # 10543) on :
 
i think maybe 240 hp
 

---

Posted by sydewayzLX50 (Member # 10217) on :
 
without spray 270-280
with spray around 350 or so
 

---

Posted by 707notchback jaejae (Member # 7958) on :
 
if your valves dont touch..lol should be a pretty fast motor
 

---

Posted by LILstock3valve (Member # 4702) on :
 
I would probably say to runthe smaller 1.90 intake valve edelbrock heads and an e303 with some 1.6 rockers. I'd say u could put about 270-280 to the wheels and 310-330 with the spray. As far as how long it will hold up is going to depend on your stock bottom end.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com