This is topic TP sensor in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023627

---

Posted by rollininmy50 (Member # 9067) on :
 
At a cold start the TPS should idle up the car for a couple few seconds, then gradually idle down, right?? if so i purchased a new on for my 89 5.0, they say it needs calibration, does any one know what ohms it should be set at??
 

---

Posted by Nastysvt (Member # 6431) on :
 
should be between .8 volts and 1.0 volts.
 

---

Posted by 707notchback jaejae (Member # 7958) on :
 
i like mine at .98
 

---

Posted by rollininmy50 (Member # 9067) on :
 
thanks !!
 

---

Posted by rollininmy50 (Member # 9067) on :
 
should this be done with the key on engine off?? i mean how do i get the ohms to read??
 

---

Posted by sic70stang (Member # 4347) on :
 
its volts not oms and key on engine off. check the green wire for the volt signal
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com