This is topic AFR 165 Question in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022790
Posted by Ryan... (Member # 7089) on
:
Hey guys will afr 165s at 58cc bump the compression up to high to use a blower? Will be using stock bottom end on a 90 fox. Not sure if I need to go with a different size head or not. Thanks for any info in advance
[ August 03, 2010, 12:06 AM: Message edited by: Ryan... ]
Posted by stangin' (Member # 514) on
:
i'm using those heads, 58cc and running 9# of boost and it's running just fine on the stock bottom end.
Posted by Ryan... (Member # 7089) on
:
quote:
Originally posted by stangin':
i'm using those heads, 58cc and running 9# of boost and it's running just fine on the stock bottom end.
any idea on the compression?
Posted by Quik351 (Member # 7859) on
:
9.5.1 is good
Posted by stangin' (Member # 514) on
:
quote:
Originally posted by Ryan...:
quote:
Originally posted by stangin':
i'm using those heads, 58cc and running 9# of boost and it's running just fine on the stock bottom end.
any idea on the compression?
i'm not sure on the compression.
Posted by JohnB (Member # 969) on
:
Compression should be 9.5, maybe 9.6-1 with those heads...depending on the thickness of headgasket that's used.
Posted by Ryan... (Member # 7089) on
:
Thanks guys
Fueled by Ford Mustang Owners
on CaliforniaFords.com