This is topic front cobra brakes in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021788

---

Posted by 85CHP510 (Member # 9690) on :
 
hey wazzup y'all. ey well i work at kragen, and i picked up a brand new set of cobra brake calipers direct from ford racing ( part number M2320C)for $200. not sure if thats a good price. were 270 and wit my discount it was around 203. anyways...

my question is, what else is needed? i got the brake lines that go with the calipers and the 13 inch rotors. i currently have the dual piston pbr calipers on my notch of a 99 gt. can i just slap em on?? and what about master cylinder?
 

---

Posted by PWR HNGRY 302 (Member # 6000) on :
 
If your already using SN-95 front spindles these calipers will be a direct bolt on. Its not a bad price for a pair of brand new calipers.
 

---

Posted by Blind (Member # 3052) on :
 
sometimes the calipers from parts stores dont include the brackets, if they don't...just return them because I don't think you can get them separately from anywhere.

if they do have the brackets, then all you'll probably need is the brake hose banjo bolt which iirc is different sized than the other calipers you have now.

http://www.summitracing.com/parts/FMS-M-2320-C/SuggestedParts/?prefilter=0

[ March 01, 2010, 03:23 PM: Message edited by: Blind ]
 

---

Posted by venomous99 (Member # 1917) on :
 
u can buy the brackets here and theyre ridiculously expensive
http://discbrakesrus.com/make/ford/cobrabrackets.htm
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com