This is topic ball joints..... in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015088

---

Posted by two-gun kid (Member # 5891) on :
 
how hard is it to replace them on a 87-93 a arm?
 

---

Posted by SF Coupe (Member # 1810) on :
 
I would just replace the whole a-arm with a new FMS set. You can get a set online for $180 with new ball joints and new bushings.
 

---

Posted by SPEC -Fabrication (Member # 4980) on :
 
The balljointys arent hard at all to replace but if the bushings are wasted just replace it with FMS ones like he said
 

---

Posted by 73beast351c (Member # 5397) on :
 
yeah it's pretty easy to install and take apart. I just did it like 3 weeks ago.
 

---

Posted by gt1990gt (Member # 7211) on :
 
cant fined them on summit can someone post a link??
 

---

Posted by 88DroptopGT (Member # 2535) on :
 
Pretty easy just use a BFH and hit the side of the ball joint to rattle it then bash the top with the nut still attached.

Use some penetrant and you should be set. Make sure to wear safety goggles too.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com