This is topic cobra cam in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015043
Posted by v-town50 (Member # 4920) on
:
jsut curious but which cam did they run in the 93 cobra. thinkin about a cam change over the winter and im just tryin to get an idea
Posted by SmokinLX (Member # 1684) on
:
This is not the cam You want. I have heard it's worse than a stock 5.0 cam.
Posted by v-town50 (Member # 4920) on
:
yea i was never plannin on runnin the exact same cam as that i just wanted a general idea of what they ran. im leanin towards either an X or Z cam cuz i dont have to worry about drivin it on the street anymore
Posted by SmokinLX (Member # 1684) on
:
quote:
Originally posted by v-town50:
yea i was never plannin on runnin the exact same cam as that i just wanted a general idea of what they ran. im leanin towards either an X or Z cam cuz i dont have to worry about drivin it on the street anymore
I have a f cam and it's Ok, but they are a very old grind and alot advancement since then. I would at least go with an Anderson cam if not a custom. Spending an extra 200 buck's for 15-20 more horsepower is cheap HP to $.
Posted by 93mustang50 (Member # 6642) on
:
If this is not a street car your cam selection is awesome. choose that offers the most for your set up, anderson makes good ones, as well as comp. what is your set up(shortblock, H/C/I)?
Posted by v-town50 (Member # 4920) on
:
right now ive got a cobra intake stock cam, 19lb injectors and every other bolt on except for gears and heads
Posted by SmokinLX (Member # 1684) on
:
quote:
Originally posted by v-town50:
right now ive got a cobra intake stock cam, 19lb injectors and every other bolt on except for gears and heads
Are You planning on doing head's when You do the cam?
Posted by v-town50 (Member # 4920) on
:
hopefully if i have the money for it, if not ill prob just port the stock ones. im not sure yet
Posted by SmokinLX (Member # 1684) on
:
quote:
Originally posted by v-town50:
hopefully if i have the money for it, if not ill prob just port the stock ones. im not sure yet
You should give the company the sp;ec's of the head's You are planning on getting as opposed to the stock one if You are going to do it before You buy the head's. IMHO I would'nt waste the money on porting the stock one's, just wait till You can swing the head's and cam, but good luck with whatever You do!
Fueled by Ford Mustang Owners
on CaliforniaFords.com