This is topic San Francisco Shops in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013157

Posted by Aereon (Member # 6466) on :
 
I need to know a good autobody shop or an automotive shop with alotta goodies for mustangs in san francisco.. ty in advance
 
Posted by NO MANRZ (Member # 566) on :
 
Not in SF, but there is Mustang Ranch in Santa Clara. They do mostly old school stangs, but have late model stuff as well.
 
Posted by Aereon (Member # 6466) on :
 
are there any others? and is there a number or an address so i can see or talk to them about my mustang? im fairly new to the modding scene so im in the information gathering phase atm before i start anything..=P
 
Posted by NO MANRZ (Member # 566) on :
 
If you're new, read a bunch of old posts in this section and ask a ton of questions before spending any money. If money is tight, learn how to install everything yourself so you don't have to pay someone to do it for you.
 
Posted by Apexmotorsports (Member # 5307) on :
 
We specialize in late model Mustangs and can help guide you with advice and suggestions about upgrades to your car.

Come by anytime OR email us and we wuold be more than happy to answer any of your questions.
 
Posted by Jmir018 (Member # 1414) on :
 
quote:
Originally posted by Aereon:
I need to know a good autobody shop or an automotive shop with alotta goodies for mustangs in san francisco.. ty in advance

RPM in Rohnert park. about 20 mins north of s.f.
Worth the drive in my opinion. they have the best hands down customer service there is. period.
if you have any Technical Questions just call them and they'll answer your questions...
707-584-8230 ask for Martiń or Brad
 
Posted by 92-5.0 (Member # 5961) on :
 
I need help getting my car running right. It hesitates, sputters, and feels like I have a misfire. Then when the car reaches normal operating tempature, it gets worse. I have changed the Idle Air Control Valve, both the Temp Sensor and sending unit, I replaced my mass air meter from a 75 Pro M to a 73 C&L. My plug wires, cap and rotor are new as well. All this did was smooth out my idle some. That is it. My car still runs bad. How much do you charge to take a look at it and go from there?
 
Posted by 92stangLX (Member # 3252) on :
 
quote:
Originally posted by Jmir018:
quote:
Originally posted by Aereon:
I need to know a good autobody shop or an automotive shop with alotta goodies for mustangs in san francisco.. ty in advance

RPM in Rohnert park. about 20 mins north of s.f.
Worth the drive in my opinion. they have the best hands down customer service there is. period.
if you have any Technical Questions just call them and they'll answer your questions...
707-584-8230 ask for Martiń or Brad

Damn 20 minutes? You must be seriously hauin' ass. It takes me almost an hour.
 
Posted by Jmir018 (Member # 1414) on :
 
quote:
Originally posted by 92stangLX:
quote:
Originally posted by Jmir018:
quote:
Originally posted by Aereon:
I need to know a good autobody shop or an automotive shop with alotta goodies for mustangs in san francisco.. ty in advance

RPM in Rohnert park. about 20 mins north of s.f.
Worth the drive in my opinion. they have the best hands down customer service there is. period.
if you have any Technical Questions just call them and they'll answer your questions...
707-584-8230 ask for Martiń or Brad

Damn 20 minutes? You must be seriously hauin' ass. It takes me almost an hour.
[Wink]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com