This is topic tranny seal in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013018

---

Posted by crazyhorse (Member # 5662) on :
 
Ive noticed a leak on the t-5 where the driveshaft yoke meets the tranny, i think the seal might be worn. is it easy to replace? and what is the name of the part so i can buy it?
 

---

Posted by mtbaughs (Member # 4052) on :
 
Yes it is easy to replace...you'll want to pick up a tailshaft seal. The old one just prys out
 

---

Posted by crazyhorse (Member # 5662) on :
 
I just took out the seal, looks fine but ripped the rubber lip on it so i need to replace it. is there any sealant I can use to prevent leaks when installing the new seal?
 

---

Posted by mtbaughs (Member # 4052) on :
 
I typically just install it dry with a bit of oil on the rubber portion. If you want a little extra insurance place a thin layer of silicon around the metal portion. Don't forget to check the driveshaft yoke for ridges or anything that will wipe out the new seal. Also your tranny mount should be in good shape as well
 

---

Posted by 1FAST89GT (Member # 5071) on :
 
i don't recommend using silicone
 

---

Posted by crazyhorse (Member # 5662) on :
 
i just installed a new thicker seal with more rubber from vic hubbards, now i realized i have a motor oil leak from the tranny/motor joint. I hope its not the main engine seal, its a new motor
 

---

Posted by PWR HNGRY 302 (Member # 6000) on :
 
So thats what its called, I had the same problem and kragen autozone and pepboys didn't know what the hell i was talking about.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com