This is topic V6 Suspension/Lowering ?'s in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=012666
Posted by Midnight5.0 (Member # 597) on :
 
On a 2000 V6 - if anyone has one here - what would you recommend for the best lowering springs/cc plates(if necessary?). The car is running 17" Cobras - 285's out back/255's in the front. Looking for an even drop...
 
Posted by BlackNGold (Member # 655) on :
 
I'd run the Eibach Pro-kit and Maximum Motorsports CC plates...The Eibach's are a little soft, but offer a good ride...

I think this combo is really good for the daily driven car....You never mentioned what you plan on doing with the car so as far as "best" we'd need to know more info and then maybe we could make better suggestions....

I installed some FMS "C" springs for a friend on a 98 V6 vert and my friend was happy, but he sold it to his sister who then complained the ride was too stiff...~if that means anything....
 
Posted by Jmir018 (Member # 1414) on :
 
Eibach springs on my buddies former v6
-
 
Posted by PWR HNGRY 302 (Member # 6000) on :
 
Thats a nice v6
 
Posted by RobertTS (Member # 1022) on :
 
Thats the best looking v6 Ive seen,,
 
Posted by Jmir018 (Member # 1414) on :
 
since you guys like it.. a couple more.. [Razz]
-
-
-
My former vert also had eibach.. so did carlos's gt.. but he cut one coil.. [patriot]
-

[ December 15, 2005, 12:38 AM: Message edited by: Jmir018 ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com