This is topic If i capp off PCV hole and run vaccum line to oil breather...Possible? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007637
Posted by AL STOCK (Member # 1852) on :
 
Im going to capp off my PVC hole on the lower intake and since pressure will build up.. Im gonna run the same vaccum line off the upper intake to the side of the oil filler...

Because everytime i capp off the upper intake pvc line the whole car dies...

Anyone know any solutions?

[ April 24, 2004, 05:10 PM: Message edited by: AL STOCK ]
 
Posted by JohnCM (Member # 1076) on :
 
Hungry Hippo has a solution i beleive. [patriot]
 
Posted by AL STOCK (Member # 1852) on :
 
Thanks, maybe he will catch this thread
 
Posted by 2stangs69-91 (Member # 1951) on :
 
If you are trying to get rid of blow-by by doing this it is the wrong way. ESP if you are supercharged.
 
Posted by Yung Than (Member # 728) on :
 
I have a problem as well. Everytime I checked the passage ways of my upper and lower intake they are all slicked with thick oil and I don't know how that helps in the chambers with combustion. I've had to clean the spark plugs several times. Is there a way to stop the oil splash from the pvc from entering the upper intake?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com