This is topic knocking noise on the engine in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007621
Posted by losbadgt (Member # 4394) on
:
it's been a year since i rebuilt my bottom end, one of my lifter was knocking, so i had them changed two times already, and it doesn't stop, it only does it when the car is cool. Also went with synthetic oil and it reduced the noise a lot. Can anybody help me on this what should i do.
[ April 22, 2004, 02:00 PM: Message edited by: losbadgt ]
Posted by Black94 5.0 (Member # 655) on
:
So, are you talking about lifter noise or rod knock?...
Here are you choices
1) Lifter noise~ Buy the correct valve springs, push rods, rockers and lifters and make sure the lifter pre-load is suficiant...
2) Rod Knock~ Rebuild your bottom end...
By the way, what weight viscosity oil are you using 10w30?..If so go thicker, like 20w50, it will help...
Posted by losbadgt (Member # 4394) on
:
it's not rod knock, i was thinking on putting cams on my car, do u know any prices on installation.
Fueled by Ford Mustang Owners
on CaliforniaFords.com