This is topic Short belt & wheel studs??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007617
Posted by Don (Member # 938) on :
 
Does anyone have a part # for a short belt.
Also I need to know the dimensions of the wheel studs for my car. It has stock brakes with rear drum. I guess summit doesn't know this by application only by size.
 
Posted by Black94 5.0 (Member # 655) on :
 
What year make and model?...You have 3 vehicles in your sig, I'm guessing it's one of those...

What kind of short belt do you want?...Do you want to bypass your smog, AC, power steering or what?...

Are you looking for stock replacement wheel studs or longer ones?...If longer how long?...If stock, I'd just go to your local parts store and take an old one with me..
 
Posted by Don (Member # 938) on :
 
88 mustang: bypass smog PS AC.
Long studs for welds, in front and back.
 
Posted by Black94 5.0 (Member # 655) on :
 
For most A/C-equipped 5.0-liter engines, a 701/2-inch belt will bypass the air pump and the power-steering pump...So, a common belt size would be 705K6...K6 meaning 6rib...


Check out this link for wheel studs...


http://www.maximummotorsports.com/wheelstuds.asp

[patriot]
 
Posted by blind (Member # 3052) on :
 
my setup isn't the most typical but I run a 64" belt with smog pump enabled, and a 60" with it disabled.

(march a/c delete, manual steering, underdrive pulley's)
 
Posted by Don (Member # 938) on :
 
Thank You [Smile]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com