best bolt on's for 2001 gt 4.6 - Northern California Ford Owners

This is topic best bolt on's for 2001 gt 4.6 in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006330

Posted by SSmokinmaro (Member # 3897) on :

what are the best bolt on's for a 2001 gt 4.6. the car is completely stock and is a stick. can you tell me some good bolt on's that are a good buy for their performance. thanks.

Posted by 4.6 EATIN GM'S (Member # 1633) on :

quote:
Originally posted by SSmokinmaro:
what are the best bolt on's for a 2001 gt 4.6. the car is completely stock and is a stick. can you tell me some good bolt on's that are a good buy for their performance. thanks.

how much u looking to spend? i suggest gears(nothing under 3.90's)and full exaust(lt's to the muffs) and then like i said its all in how much u want to spend [Wink]

but thats what i would start with

Posted by NorCalRydaz (Member # 3233) on :

BUY MY FORD MOTORSPORT 4:10 GEARS FOR $100.

Posted by DropTopFox (Member # 1689) on :

Gears, exhaust, and short throw, and intake. [patriot]

Posted by wilit (Member # 3367) on :

Kenne Bell. Quite possibly one of the best bolt-on's you can buy.

Posted by hidnn.o.s. (Member # 1219) on :

K&N, densecharger or some kind of fenderwell kit. Power pulleys. timing adjuster. exhaust. throttle body. mass air..................

Posted by spegull03 (Member # 2842) on :

Pro- 5.0 shifter! [Big Grin]

Posted by Bill/APEX Motorsports (Member # 636) on :

Here's what I'd recommend, in this order:
Pro-5.0 shifter
Bassani x-pipe
Bassani cat-back system
Gears (3.73s are my all-around favorite for 4.6s)
Underdrive pulleys
Cold air intake
Accufab intake plenum with 70mm throttle body
RACE Systems chip (dyno-tuned here @ APEX)
Ford Motorsport ceramic-coated shorty headers

I keep most of these (if not all of them) parts in stock, so let me know if you have any other questions, ok?

[ December 18, 2003, 09:45 AM: Message edited by: Bill/APEX Motorsports ]

Posted by Gear Head (Member # 779) on :

quote:
Originally posted by SSmokinmaro:
what are the best bolt on's for a 2001 gt 4.6. the car is completely stock and is a stick. can you tell me some good bolt on's that are a good buy for their performance. thanks.

1. Pro 5.0 Shifter
2. Off Road Pipe off your choice(depending on how much you want to spend and what type of exhaust note you want)
3. Catback of your choice(depending on how much you want to spend and what type of exhaust note you want)
4. FMS 3.73 Gears
5. Underdrive Pulleys

Posted by QWICK46 (Member # 1843) on :

Can't go wrong with a shifter & gears.

From there, it's my opinion that it depends on what your goals are for the car.

Posted by slidewayz94 (Member # 3101) on :

gears, exhaust, and nitrous.

Posted by Black94 5.0 (Member # 655) on :

C&L MAF, long tubes, off road H, and BX cat back, 3.73's and ASP U-pulleys...

Posted by hidnn.o.s. (Member # 1219) on :

Look in the most recent 5.0 MUSTANG magazine. All of your quesions will be answered in there.

Posted by 7.3L White Whale (Member # 1848) on :

I dont know about mustangs, but the pulley on my car didnt do jack squat shit.

Posted by hidnn.o.s. (Member # 1219) on :

quote:
Originally posted by 7.3L White Whale:
the pulley on my car didnt do jack squat shit.

WTF

You put on one pulley? What kind of car?

Under drive pulleys do help mustangs (and SHO's.)

Fueled by Ford Mustang Owners
on CaliforniaFords.com