This is topic Crappy Idle in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004577

---

Posted by Jerm95gt (Member # 1239) on :
 
Now that i got the crane2031 and heads in my car won't idle. My buddy tweeked an idle screw and it worked for like a day and then it won't idle again.......i pulled my chip out after trying a bunch of shit and now it sometimes idles at like 700....but still dies a hole bunch. Could my preburnt jetchip even affect idle?? any ideas?
 

---

Posted by MoostangGT (Member # 2894) on :
 
Have you checked for vacuum leaks?
 

---

Posted by Jerm95gt (Member # 1239) on :
 
yea its not a vaccum leak
 

---

Posted by MoostangGT (Member # 2894) on :
 
Ok well.. when you took your chip out, did you reset the computer?
 

---

Posted by Jerm95gt (Member # 1239) on :
 
yea
 

---

Posted by Bill/APEX Motorsports (Member # 636) on :
 
'94-'95s are pretty finicky when it comes to idling after a cam is installed. We usually switch to a pre-'94 Idle Air Bypass valve, which most often cures air-related idle issues.
 

---

Posted by Jerm95gt (Member # 1239) on :
 
how much will u charge to do that on my car
 

---

Posted by mike g (Member # 2919) on :
 
i'm pretty sure its only 2 bolts and a gasket and obviously the new IAB, but i dont know much about the sn95 stangs it could require some sort of mod to make it work.
 

---

Posted by 281n/a (Member # 1465) on :
 
jeremy did you check codes on it?
 

---

Posted by Jerm95gt (Member # 1239) on :
 
yea no problem there.......
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com