This is topic Cam Question please help in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=000021
Posted by Albert1 (Member # 558) on
:
I just got my car running again and I put a crower cam in it. It is a 347 supercharged motor and the car runs like shit! The cam goes as follows #513 288/298 duration at 1.6 and 228/234 and the lift is 512-531 any help will be great thanks a lot
Albert
Posted by Albert1 (Member # 558) on
:
does anyone have this cam in there car?? is the firing order the same as other cams???
Posted by st5150 (Member # 51) on
:
What do you mean by "runs like shit" ?
What heads and intake do you have on the car? What blower? What fuel setup?
Posted by Albert1 (Member # 558) on
:
I think we have a bad vaccum leak looking for it at the time for the heads it has edelbrock's an edelbrock intake and 36lbs injectors aeromotive fuel rails t-rex pump with a 190 in tank it has about everything I could think of
Posted by PunkINa5.SLOW (Member # 10) on
:
What is the duration at .050? Did you check piston to valve clearance?
Posted by Blu50Stang (Member # 489) on
:
Albert, do you know what kinda vacuum you have right now? Or does it just need a custom chip?
Posted by Albert1 (Member # 558) on
:
The piston to valve clearance should be fine! they are inverted dome je with little valves in them and I know the cam should work.
As for the custom chip it has a preburn from byron and it still is not running any good. The car has a real hard time at idel and is dying trying to work out the bugs so I could get it on the street