This is topic ED curtis FTI top end, Heads, intake and Cam in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=139972

Posted by v-town coupe (Member # 2771) on :
 
Going to a Coyote setup in my 67. For sale are some left over items from the pushrod build the has been mostly sold off.

All of the following parts came from Ed Curtis from FTI and were spec'd to build a very hot 302 or hot 331 stroker.

The parts are:

Carburetor style Victor Jr.intake heavily ported (was going to use bolt on EFI)
Plenum/carb flange ported.
port matched to TFS 170 heads.
Some runner work.
As cast flows roughly 275 CFM, with the current port work right about 330 CFM.
$950 into the intake, sell for $650.

Custom ground billet hydraulic roller cam. you will need aftermarket pistons since the cam is right at .600". paid $399 sell for $250.

TFS 170 11R CNC heads, 53CC chambers. The add-ons I had done were 7/16 ARP rocker studs, High lift pac racing springs, and Ed's 5 angle valve cut on the valves. paid $1900.00, Had Nate at RPM machine shop in Rohnert park do a once over which included blending two valve seats that had a little step in the transition, he honed all the guides to spec and re-lapped all the valves. $290.00. Total $2190.00 if you are looking for pictures, the photos on the FTI website are of my heads, they were the first set bought and ed used them for the photos on his site.

Heads are brand new sell $1800.00 Below are the specs/hp numbers sent to me from TFS, I can forward the email to those interested.

"Hello,

I attached a sheet that has some dyno combinations we put together. They were all based off of a 306 with 11:1 compression. Here is the flow chart.

Twisted Wedge 11R 170cc CNC Street ported
Lift value: Intake Flow CFM Exhaust Flow CFM
0.100" 71 60
0.200" 137 109
0.300" 199 144
0.400" 245 175
0.500" 266 204
0.600" 277 216

Tests conducted at @ 28" of water (pressure). Bore size: 4.030"
53cc CNC-profiled combustion chambers;

Exhaust with 1 3/4" pipe

Thanks,
Harold Miller
Trick Flow Tech
Ph. (330) 630-1555
Fx. (330) 633-2504 "

170cc Combinations

442HP/380lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403001 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Performer RPM air gap intake manifold
TFS-20750R 750cfm Carburetor

461HP/391lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403001 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Victor Jr air gap intake manifold
TFS-20750R 750cfm Carburetor

462HP/385lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403001 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Super Victor air gap intake manifold
TFS-20750R 750cfm Carburetor

463HP/386lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403001 Camshaft
TFS-51478520 Timing Chain set
TFS-51400521 1.72 Rocker arms
TFS-21407050 pushrod
Edelbrock Super Victor air gap intake manifold
TFS-20750R 750cfm Carburetor

449HP/382lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403002 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Performer RPM air gap intake manifold
TFS-20750R 750cfm Carburetor

467HP/391lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403002 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Victor Jr air gap intake manifold
TFS-20750R 750cfm Carburetor

466HP/389lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403002 Camshaft
TFS-51478520 Timing Chain set
TFS-51400521 1.72 Rocker arms
TFS-21407050 pushrod
Edelbrock Victor Jr air gap intake manifold
TFS-20750R 750cfm Carburetor

490HP/389lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403003 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Victor Jr air gap intake manifold
TFS-20750R 750cfm Carburetor

485HP/390lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403003 Camshaft
TFS-51478520 Timing Chain set
TFS-51400521 1.72 Rocker arms
TFS-21407050 pushrod
Edelbrock Victor Jr air gap intake manifold
TFS-20750R 750cfm Carburetor

503HP/386lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403003 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Super Victor air gap intake manifold
TFS-20750R 750cfm Carburetor

494HP/387lbft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403003 Camshaft
TFS-51478520 Timing Chain set
TFS-51400521 1.72 Rocker arms
TFS-21407050 pushrod
Edelbrock Super Victor air gap intake manifold
TFS-20750R 750cfm Carburetor

505HP/387lb-ft
TFS-11R 170cc 53cc chamber cylinder head
TFS-51403003 Camshaft
TFS-51478520 Timing Chain set
TFS-51400520 1.6 Rocker arms
TFS-21407050 pushrod
Edelbrock Milled Super Victor air gap intake manifold
TFS-20750R 750cfm Carburetor
 
Posted by v-town coupe (Member # 2771) on :
 
Pm's replied to. sorry no trades at the moment unless you have a good running fair mileage complete gen 2 coyote.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com