This is topic LOTS OF MUSTANG PARTS!! in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=125075

Posted by Blow_U_In_Reverse (Member # 12298) on :
 
**Need to clean out my yard so feel free to make offers.. NO lowballers though.. Buy multiple things and ill throw you a better deal!!**

-Police lightbar that goes on top of the car.. Red & Blue lights with built in speaker for siren & megaphone.. Everything works great.. Off a real mustang foxbody police car..
**$160**

-Police strobe lights that will fit only 4 eyed 79-86 mustang 5.0's.. It replaces the sealed beam for the high beams.. One side is red and the other side is blue.. these are VERY RARE!!
**$160**

-351w short block.. its a 1994 lightning F4TE Roller block.. Bored .020 over with forged pistons.. Fully rebuilt with new pistons, cam bearings, main bearing, piston rings, etc.. Ford crank & rods.. ZERO MILES!! Short Block ONLY.. NO cam, heads, or intake..
**$1200 obo**

-351w EFI upper/lower intake for mustang 5.0 foxbody.. Its an Edelbrock Performer intake manifold.. It also comes with a 1" spacer..
**$450**

-Edelbrock Victor Jr Aluminum heads for SBF 289, 302, 351w.. 2.05 & 1.60 Manley valves.. Comes with 2 sets of valve springs.. Stock edelbrock ones, and stiffer aftermarket dual valve springs.. heads have been resurfaced with zero miles.. ready to assemble & slap on..
**SOLD**

-60lb injectors & Pro-M blow-through Mass Air Sensor.. 3.5" Pro-M Protube with calibrated MAF.. can be used with 86-04 mustangs(has rectangle plug as well as adaptor for foxbody).. Injectors are EV-1 plugs..
**$600 obo**

-Strut Tower brace for foxbody.. will fit 79-93 mustang 5.0's.. Its black and slightly used.. NO hardware..
**$75**

-SLP LoudMouth catback for Cobra with Indepedant Rear Suspension.. Its a LM1 catback for IRS.. 2.5" stainless pipes with 3.5" chrome tips..
**$450 obo**

-Foxbody mustang 5.0 fuel rails with Aeromotive Fuel Pressure Regulator and fuel pressure gauge.. Comes complete with the fittings and everything.. Also comes with 21lb injectors & MAF for foxbody..
**SOLD**

-BBK 2.5" H pipe for 79-95 mustang 5.0's.. It has 2 cats on it that have been gutted.. So if a cop looks underneath it still have cats for visual, but its still an offroad midpipe.. All 4 flanges intact and in good shape..
**$150 obo**

-Bullitt 13" Front brake setup.. Same as Cobra brakes except they have the Running Horse logo instead of saying Cobra.. These are pretty hard to find.. Comes with both calipers, 13" rotors, brake pads, and low mileage 5 lug hubs.. NO spindles! one pin is missing for the calipers but can be bought brand new for $5 online..
**SOLD**

-OEM black dash for 87-93 mustangs.. In great shape!! complete dash..
**SOLD**

-3" cowl hood for 87-93 mustang 5.0.. needs some minor work, but works perfectly fine as is!! it is black and has hood pin holes..
**SOLD**

-Woodgrain dash bezel for 79-86 mustang that has been customized for aftermarket gauges.. Fits two 5" gauges(tach & speedo) & 4 smaller gauges that fit where stock gauges would be.. Made the bezel based on autometer gauges but it should work with basically any brand.. NO gauges, ONLY the bezel..
**$50**

-31 spline axles for 94-98 mustangs.. ford racing axles.. very low miles.. wheel studs already pressed on.. 5 lug.. can be used to do 5 lug disc conversion on foxbody..
**$100 obo**

-EFI main computer/engine harness for 91-93 with 1 brown plug.. NO ecu..
**$100 obo**

-EFI main computer/engine harness for 88-90 with 2 plugs.. NO ecu..
**$100 obo**

-A9L ecu for mustang 5.0 88-93 with mass air..
**$125 FIRM**

-70mm BBK throttle body & egr spacer.. No sensors.. comes with tb to egr gasket.. painted gloss black.. low miles..
**SOLD**

-Maximum MotorSport adjustable complete tie rod & bumpsteer kit for Cobra Independant Rear Suspension.. Will fit any 99-04 IRS.. BRAND NEW IN THE BOX STILL!! part #: MMIRSTR-2..
**$225 FIRM**

-IRS low profile bolts.. BRAND NEW in the packaging still..
**$15**

-BRAND NEW 87-93 head lights.. stock OE style with amber corners.. brand new in the box!!
**SOLD**

-OEM 87-93 head lights.. theyre in pretty good condition.. took em off to put brand new head lights when i painted my car..
**SOLD**

-CHROME side mirrors in GREAT condition for 79-86 mustangs!! VERY HARD TO FIND!! Both sides..
**$150 obo**

-BRAND NEW carpet for 79-93 coupe.. It is TAN and has the jute underlay.. NEVER USED, STILL BRAND NEW!! Will fit any notch from 79-93, and maybe convertibles..
**$160 obo**

-Stock mustang 5.0 mufflers with flotubes.. NO tail pipes.. just the muffler and flowtubes ready to bolt on to your mid pipe.. Flanges are intact and in great shape..
**$50 obo**

-Rear metal bumper reinforcement.. Just the metal part, not the actual bumper cover..
**$20**

-I also have a bunch of stock foxbody parts like alternators, power steering rach & pinions, power steering pumps, valve covers, distributor, plastic fan & fan clutch, starter solenoid, gauge clusters, door handles, sensors, etc.. Let me know what you need, I might have it..

I do NOT have any body pieces beside what I have listed..

call/text/PM
6502485682

-FiJi- [patriot]

[ 2015-01-20, 11:00 AM: Message edited by: Blow_U_In_Reverse ]
 
Posted by NEIGHT (Member # 8741) on :
 
Send me a pik of the BBK throttle body and spacer.
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by NEIGHT:
Send me a pik of the BBK throttle body and spacer.

Pic sent..

PM's replied..

TTT
 
Posted by Brokn Nx (Member # 8526) on :
 
In regards to the 351 EFI intake....

Is the lower the 3884 part number? It should have egr ports.

Is the upper the old style with the finned cover or the newer style with the smooth cover?

Any cracks, stripped or damaged threads or porting to either part?
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by Brokn Nx:
In regards to the 351 EFI intake....

Is the lower the 3884 part number? It should have egr ports.

Is the upper the old style with the finned cover or the newer style with the smooth cover?

Any cracks, stripped or damaged threads or porting to either part?

Dont remember the part number but i know it does have the egr ports.. its the newer style smooth cover.. no cracks, or stripped threads, or damage, or Any of that.. the lower literally only has start up time, and then i took it off & got the trick flow intake bcz it was a boosted setup.. it also has a 1" spacer..
 
Posted by ponykid90 (Member # 12978) on :
 
do you have brackets and bolts for all front engine accessories (water pump, alterntor bracket, p/s bracket etc.) ???
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by ponykid90:
do you have brackets and bolts for all front engine accessories (water pump, alterntor bracket, p/s bracket etc.) ???

pm sent
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
All PM's replied.. TTT
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
edelbrock heads, foxbody fuel setup, bullitt brake setup, & cowl hood SOLD!!

TTT
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
edelbrock heads, foxbody fuel setup, bullitt brake setup, & cowl hood SOLD!!

TTT
 
Posted by 9DBlackMagic (Member # 4664) on :
 
Hey Fiji do you still have the 140 speedo that came with the Detective.
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
quote:
Originally posted by 9DBlackMagic:
Hey Fiji do you still have the 140 speedo that came with the Detective.

PM sent
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
70mm tb & spacer, and bnib head lights sold..

Bump
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
TTT
 
Posted by 86_on_DA_machs (Member # 11083) on :
 
TTT
 
Posted by Blow_U_In_Reverse (Member # 12298) on :
 
bump
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com