For Sale or Parting Out, 88 GT Convertible Griggs - Northern California Ford Owners

This is topic For Sale or Parting Out, 88 GT Convertible Griggs in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=108628

Posted by racsirx (Member # 1710) on :

For Sale as whole or Parting Out 1988 GT Convertible with no motor, has T-5z Tranny, Hurst Shifter, Pro-M 77mm mass air meter for 30lb injectors, 3:55 gears, Auburn Posi, 73mm front calipers, SVO master cylinder, SSBC rear disc brake kit, FMS 140 speedo, FMS aluminum driveshaft, Griggs Torque Arm, Griggs Panhard Bar, Griggs lower rear control arms, Griggs coil overs, Griggs Front tubular control arms, Factory K-member that was boxed in by Griggs, Griggs through floor Subframe Connectors, Global West camber caster plates, Koni Reds, Kenny Brown 6 point roll bar, Crane Hi-6 ignition box, 22 gallon Fuel Safe fuel cell, Aeromotive fuel rails, Griffin aluminum radiator, Carbon Fiber stock looking hood-not fiberglass, it has been parked for 5+ years and isn't the best shape, I bought it from the original owner.

GT Tail Lights-SOLD
Rear Seats-SOLD
Front Seats-SOLD
140 Speedo-SOLD
FMS Aluminum Driveshaft-SOLD
Catted X-pipe-SOLD
T-5z Transmission-SOLD
Hurst Shifter-SOLD
Passenger Door-SOLD
6 Point Roll Bar-SOLD
Red Konis-SOLD
Carbon Fiber Hood-SOLD
Griggs K-member-SOLD
Griggs Front Control Arms-SOLD
Griggs Coilover Kit-SOLD
Griggs Bumpsteer Kit-SOLD
Aeromotive Fuel Rails-SOLD
Front GT Bumper-SOLD
Trunk Lid-SOLD

[ 2013-05-26, 02:11 PM: Message edited by: racsirx ]

Posted by Fast(er) Eddie (Member # 4737) on :

How much for the tranny, hood, radiator, control arms and speedo?

not looking for a package price per se.

just want to know individual prices.

Thanks Lee

Posted by REDLIGHTING (Member # 11296) on :

Price for rear disc kit (If parted out)

Posted by mrsmcizzle (Member # 9643) on :

How much for the torque arm and Panhard bar?

Posted by racsirx (Member # 1710) on :

I will post pics later on today, I have a few interested buyers for the whole thing, I will determine prices on the parts if it doesnt sell as a whole,

Posted by NEIGHT (Member # 8741) on :

Gonna need Trans, driveshaft, N possibly the rear disk brake kit.

Posted by 5.0Abe (Member # 11310) on :

How much for the roll bar ?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Fast(er) Eddie:
How much for the tranny, hood, radiator, control arms and speedo?

not looking for a package price per se.

just want to know individual prices.

Thanks Lee

I will have to have the tranny checked before I decide on price, hood is $200, radiator is $150, front control arms is $200, speedo is $60

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by REDLIGHTING:
Price for rear disc kit (If parted out)

I would like to sell the Rearend complete with the brakes

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by mrsmcizzle:
How much for the torque arm and Panhard bar?

The torque looks easy to unbolt but I will have to cut out the brackets for the panhard bar, once I do that then I will decide on the price.

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by NEIGHT:
Gonna need Trans, driveshaft, N possibly the rear disk brake kit.

I will have to get the tranny checked before I decide on a price, driveshaft is $150, would like to sell the brakes complete with the Rearend.

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 5.0Abe:
How much for the roll bar ?

$200 for the roll bar

Posted by Nifty50 (Member # 9987) on :

will the roll bar work in a hatch? or is it just for verts?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Nifty50:
will the roll bar work in a hatch? or is it just for verts?

Just for convertibles

Posted by tr mach (Member # 10785) on :

How for the coil over

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by tr mach:
How for the coil over

$200 and there is no wear on the threads.

Posted by jayl (Member # 185) on :

Hey whats up Lee! I see the car is being parted huh....got any dashboards/stock door panels laying from this one or others? don't need anything special just some filler for the race car haha. just let me know! I'll give you that fancy 5 gallon DADS cell for both if you want!

Jason

Posted by racsirx (Member # 1710) on :

I have some dashes but not the best door panels, I might be interested in the fuel cell.

Posted by jayl (Member # 185) on :

Sounds good, just let me know. I don't need anything too nice for the door panels , any grey power ones would work. I'll probably paint all that stuff anyway. but yeah just let me know and i could swing by that cell whenever.

Jason

Posted by phildog (Member # 1214) on :

Price for the fuel cell?

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by phildog:
Price for the fuel cell?

$400

Posted by mrsmcizzle (Member # 9643) on :

quote:
Originally posted by racsirx:

quote:
Originally posted by mrsmcizzle:
How much for the torque arm and Panhard bar?
The torque looks easy to unbolt but I will have to cut out the brackets for the panhard bar, once I do that then I will decide on the price.

no sweat! When you come up with some numbers let me know.

Posted by Wht86drop (Member # 12104) on :

I need the driveshaft asap if you stilll have it. I just broke mine

Posted by 90 7up lx (Member # 10304) on :

Is the roll bar a weld in or bolt in style??

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by 90 7up lx:
Is the roll bar a weld in or bolt in style??

It's a bolt in style

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Wht86drop:
I need the driveshaft asap if you stilll have it. I just broke mine

$150 and it's yours

Posted by Venomousnotch (Member # 8695) on :

Hey Lee how much for the third brake light with wiring..Pm me..Thanks [patriot]

Posted by racsirx (Member # 1710) on :

quote:
Originally posted by Venomousnotch:
Hey Lee how much for the third brake light with wiring..Pm me..Thanks

Sorry I forgot to get back to you, do you still need it?

Posted by racsirx (Member # 1710) on :

ttt

Fueled by Ford Mustang Owners
on CaliforniaFords.com