This is topic Teksid Cobra engine, 5.0 long block, gt 40 intake etc. in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=108432
Posted by 86redGT (Member # 6961) on :
 
A bunch of left over parts and take out parts from the swap in my cobra, as well as some parts left over from my 86.


1996 Cobra Teksid Engine Complete From Pan to Intake. Have all of the parts needed to get it running. Computer Harness injectors fuel rails etc. Asking 800.

1997 Cobra t-45 with King Cobra clutch. 300 obo.

2001 Cobra intake manifold, good if your looking to do a C head swap or going with a centri on your 03 cobra. 300 obo.

Tubular GT-40 intake with 3/4" spacer bolt and gasket kit. 300 obo

1988 5.0 with e303 cam and new timing chain, stock heads, currently bare with no timing cover or intake manifold. $500 obo

I have some more stuff and will update this post as I find it.

There is a link to my photobucket in the CL ad. Craigslist Ad

[ November 08, 2012, 04:18 PM: Message edited by: 86redGT ]
 
Posted by Stangn5oh (Member # 10875) on :
 
It says in add 4 angle valve job on heads, So is that like rebuilt??
 
Posted by 86redGT (Member # 6961) on :
 
"Multi-angle valve jobs are the most common way to make a valve more aerodynamic and make the head more efficient. A multi-angle valve job puts extra cuts on the valve near where it mates with the cylinder head, streamlining it and helping to move air past its surfaces with the minimum resistance and turbulence possible. OEM valve jobs are usually one or two-angle valve jobs. This is done to keep costs low, and even if they want more airflow, OEMs will often just switch to a larger valve instead of using multi-angle valve jobs because it's cheaper than performing the extra machining of a multi-angle job."
 
Posted by SydeWaySix (Member # 3596) on :
 
Never mind...just read the CL ad.

[ October 29, 2012, 01:14 AM: Message edited by: SydeWaySix ]
 
Posted by 86redGT (Member # 6961) on :
 
TTT
 
Posted by BLoWN FR500 (Member # 8766) on :
 
.

[ October 29, 2012, 02:53 PM: Message edited by: BLoWN FR500 ]
 
Posted by 86redGT (Member # 6961) on :
 
TTT would like to move this stuff, pm me offers.
 
Posted by 86redGT (Member # 6961) on :
 
TTT, Throwing in an electric water pump with the engine.
 
Posted by 86redGT (Member # 6961) on :
 
TTT
 
Posted by 86redGT (Member # 6961) on :
 
TTT lowered prices
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com