This is topic FS or trade 67 termi swap SOLD!!! in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=095113

---

Posted by 65mustang408 (Member # 8681) on :
 
I love this car very much but im looking to have a more luxury sports car for a while. Driving this is a blast and gets TONS of attention and compliments. Car is a sick street monster. No smog no worrys, go as crazy as you want. Car is not perfect and still needs misc interior pieces and odds and ends to be perfect. Its a never ending canvas to build,and im always changing or updating. Looking to get $18,000 firm!!!! Or will trade for a c5 z06 black on black....car is daily drivable anywhere if you dont mind a radical car. 5000 miles on car never overheats even in the hottest bumper to bumper traffic.Call or txt 916 670 3515 Parts list
67 mustang coupe
Engine:
-AED tuned with sct xcal 3
-517rwhp 450rwtq stock 3.65 pulley 10# of boost.
-2.76 race gas made an extra 80 hp and trq through the rpms until it got to 5k and belt slip and dropped from 15# to 10#
-aluminum teskid block
-ARP main studs,head studs, rod bolts.
-canton 7qrt pan
-melling hv oil pump
-heat treated 8 bolt cobra crank
-heat treated manley h beam rods
-.30 over srp forged pistons 9:3-1
-hell fire rings
-mls head gaskets
-ported c heads
-comp springs
-regrind 98 cobra cams
-steggy stage 5 ported blower/plenum/T-body
-aeromotive fuel rails and reg.
-SD 60# injectors all new o-rings
-all billetflow black pulleys and quick change blower pulleys. 3.65/2.76.
-metco 4lb lower pulley
-metco 3.2 alt pulley
-brand new 120 amp alt
-accersorys consist of blower/water pump and alt.

FUEL:
-A1000 pump and filters
-16gal fuel cell
-10 feed
-6 return
-sd 60# injectors

TRANS:
-MMR/TKO
750 26spline 5 speed
-lakewood scattershield
-spec billet steel flywheel with arp bolts.
-centerforce dual friction clutch with upgraded pressure plate. 1000 miles.
-Adustable clutch cable.
-Hurst chrome shifter.
-steel driveshaft with 1350 u joints.

Rear diff:
-9",welded back brace.
-big bearing ends.
-40 spline gun drilled moser axles.
-aluminum moser 3rd member.
-3:89 gears.
-full spool!!!
-built by jaws gear and axle. Cost $4500

Exhaust:
-bbk ceramic long tubes
-3" x with 3" race bullets...car is LOUD!!!

Suspension:
-AJE tubular k member for 4.6/coyote/302-351w. Cost $2800.00
-tubar A-arms
-coil overs with 175lb springs
-sn95 spindles
-flaming river Manuel rack and shaft.
-rear caltracs with mono leafs and 9way shocks.
-heim joint rear sway bar.

Brakes:
-13" cobra front brakes
-12" wilwood rear brakes
-polished wilwood master manuel cylinder.

BODY:
-clean title
-shaved wipers
-molded side scoops
-3" custom hood
-full shaved engine bay,shaved flat firewall. Painted black (in process)
-all chrome and trim is in great condition.
-pearlescent yellow and mettalic black stripes.
-has quarter panel damage on pass side!!! Small but you need to see it.
-10 point cage out of cert. Should cert to 8:50's no problem.
-thru floor subframes tied to cage...car is very rigid!
-has parachute mount behind liscense plate..also have a parachute for it.
-spare trunk with no wing.
-HID 6k lights.
-all lights work

Interior:
-kirky aluminum race seats.
-Auto meter gauges
-new headliner,carpet
-removable grant steering wheel.

Electrical:
-entire new painless body harness.
-rjm custom 4.6 engine harness.very clean and simple harness. Factory 03 cobra ecm.

Wheels:
18*9 18*10 stealth black fr500's 275-35-18 295-35-18 khumos.







Old video






[ November 07, 2011, 08:11 PM: Message edited by: 65mustang408 ]
 

---

Posted by SIC9250 (Member # 8216) on :
 

 

---

Posted by Notch_notch (Member # 8902) on :
 
.OH Hell No! You should keep it!
 

---

Posted by adower (Member # 5955) on :
 
Any issues with it? I think you said you ran something over and tore the shock tower in a different thread.

[ November 02, 2011, 11:46 AM: Message edited by: adower ]
 

---

Posted by 65mustang408 (Member # 8681) on :
 
No issues i would drive it across country.Yea ran over a piece of wood and moved a small section of sheet metal in front of the apron over. Has no structual purpose and was able to move it back by hand lol

[ November 02, 2011, 11:57 AM: Message edited by: 65mustang408 ]
 

---

Posted by adower (Member # 5955) on :
 

quote:

---

Originally posted by 65mustang408:
Yea ran over a piece of wood and moved a small section of sheet metal in front of the apron over. Has no structual purpose and was able to move it back by hand lol

---

quote:

---

Originally posted by Luke87GT:
Do you have more detailed pics available?

And has the pass side 1/4 panel been fixed?

---

quote:

---

Originally posted by Big block 66 f100:
Dam phill beat you that bad?

---

quote:

---

Originally posted by 65mustang408:

quote:

---

Originally posted by Big block 66 f100:
Dam phill beat you that bad?

---

Haha i guarantee this car will beat any zo6 with less than 580rwhp on my stock blower pulley...car makes 517rwhp with the stock upper 3.65 pulley making 10# of boost.no smog no no hassle! Car wieghs 2880 with me and a full tank of gas. Throw a whipple on it and not much is gonna fuck with ya

---

I was jk
 

---

Posted by lxhatch5.0 (Member # 6319) on :
 
Viper/Coka Cola/Vermillion red on black stripes is all this car needs!

Sweet ride way better deal than the white notch back with the same termi swapp.

My penus just cried a little
 

---

Posted by 1RaW93SvT (Member # 9151) on :
 
Yeahhhhh buddy just like i said last night!! CHANGE CHANGE CHANGE!! sometimes you just gotta do it!!


Talon fuck what anyone or there mother says lol do what you want to do son!!

TTT for a baaadddaassss car!!
 

---

Posted by JBeezy53 (Member # 3960) on :
 

quote:

---

Originally posted by lxhatch5.0:
My penus just cried a little

---

quote:

---

Originally posted by JBeezy53:

quote:

---

Originally posted by lxhatch5.0:
My penus just cried a little

---

What's a penus?

---

Not trying to fuck this guys tread up but it's like a penis just a lot smaller
 

---

Posted by Sickgt03hd (Member # 9313) on :
 
Damn bro nice car GLWS

 

---

Posted by Venomousnotch (Member # 8695) on :
 
Good luck with the sale bro..Amazing machine you have there...
 

---

Posted by iceman302 (Member # 7180) on :
 
I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car. I don't need this car.

[ November 02, 2011, 09:02 PM: Message edited by: iceman302 ]
 

---

Posted by Brandonn (Member # 632) on :
 

quote:

---

Originally posted by iceman302:
I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car. I need this car.

---

YUP
 

---

Posted by 65mustang408 (Member # 8681) on :
 
Annd its going to a new home...
 

---

Posted by CornOil_&_Boost (Member # 5888) on :
 

quote:

---

Originally posted by 65mustang408:
Annd its going to a new home...

---

quote:

---

Originally posted by 65mustang408:
Annd its going to a new home...

---

Is it staying close Im going to miss seeing and hearing that thing.
 

---

Posted by 65mustang408 (Member # 8681) on :
 
Its going to the modesto area. Sad to see it go but i had a ton of fun with it and im gonna chill out on the car scene for a bit. But i still will come on cafords for a good laugh...even when i go lsx
 

---