351 Windsor block/shortblock, rods/pistons/etc, 1.6 rockers, LS1 parts

This is topic 351 Windsor block/shortblock, rods/pistons/etc, 1.6 rockers, LS1 parts in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=091079

Posted by jayl (Member # 185) on :

1969 351 windsor block C903 , best year to use for strength. Completely machined, cleaned/painted. .040 over with correct sizing piston clearance. Cylinder walls are perfect, block is ready to be assmbled! Looking for around $325 ( you know how much just machine work is plus the block itself!)

Keith Black 151 hyper pistons, less than 100 miles, super clean with rings and assembled on re conditioned stock rods with ARP rod bolts.
Sizing is 4.040 , ready to bolt into the block I have! $200 (bolts alone are 100 bucks)

Stock 69 351 windsor crankshaft, needs polishing from light surface rust from sitting. $75

Will make a deal for the shortblock pieces together. This motor was assembled and ran less than 100 miles, taken apart to have the heads ported and the cam changed. Only issue some local cool guy over ported the heads and ruined them. Shortblock was never run since! Solid foundation for a nice 500 horsepower combo.

Also have a set of 1.6 Erson rockers with guide plates and studs $100
Comp Cam flat tappet 306 S 10 Part numbers come back to a mechanical flat tappet large cam. $50

Also have some LS1 stuff.

Stock 5.7 LS crankshaft in perfect shape $125 extremely strong, this is the one everyone uses on the performance builds
Stock 5.7 Pistons / Rods Great shape, no issues. good for stock rebuild. $75
Stock 5.7 Aluminum block, has a small oil leak behind rear cover, not sure what caused but could be a small patch weld to fix. $125 (worth over a 80 at the recyclers anyway haha)
Stock balancer

Also have some 96-98 Cobra B heads that have been ported. They are bare, and require a hone of the camshaft bearing surface area. Oil pressure was lost and created some rough surfaces. $175

Also 96-98 Cobra 4v timing cover $55

Posted by turbo50 (Member # 6700) on :

ACMIKEE will want the block.

Dan

Posted by jayl (Member # 185) on :

cool deal dan! is a friend of yours?

Posted by jayl (Member # 185) on :

Flakeasauras rex!!! Parts still here [Roll Eyes]

Posted by jayl (Member # 185) on :

$250 on the block. $50 on the crank. $125 rods/pistons/arp bolts

Fueled by Ford Mustang Owners
on CaliforniaFords.com