**FS GREAT CONDITION TREMEC 3550 5SPD TRANS**PICS**

This is topic **FS GREAT CONDITION TREMEC 3550 5SPD TRANS**PICS** in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=089161

Posted by SIC9250 (Member # 8216) on :

Low miles,very clean,comes with tremec shifter and 302/351 bellhousing!! $1000 [patriot]

lmk fellas great deal! Trans shifts solid! 916-534-6375

[ May 27, 2011, 06:17 AM: Message edited by: SIC9250 ]

Posted by SIC9250 (Member # 8216) on :

Up [patriot]

Posted by SIC9250 (Member # 8216) on :

Pics up soon..

Posted by SIC9250 (Member # 8216) on :

[ May 27, 2011, 06:16 AM: Message edited by: SIC9250 ]

Posted by SIC9250 (Member # 8216) on :

Ttt [patriot]

Posted by SIC9250 (Member # 8216) on :

Up

Posted by Camara90 (Member # 134) on :

looks like it has been upgraded to a 26 spline input shaft so it should hold some solid power.

Posted by turbo50 (Member # 6700) on :

Whats the deal on this trans? I have a customer interested.

Why the removal?
What do you know about the 26 spline on it?
Willing to meet at the tranny shop I use for inspection if full asking price is guaranteed?

Dan

Posted by sydewayzLX50 (Member # 10217) on :

how much tougher are these trannys than t5's? i dont know much about them.

Posted by C6Z06s_own_50Deep (Member # 5888) on :

quote:
Originally posted by sydewayzLX50:
how much tougher are these trannys than t5's? i dont know much about them.

if it's in good condition, they will hold up quite a bit...I think streakmatt has an upgraded 3550 in his and his car has seen a ton of passes and hard launches

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by sydewayzLX50:
how much tougher are these trannys than t5's? i dont know much about them.

My buddies JPH331's blown 351 used to break them regularly I think 606 at the wheels? and he hated the trans cuz it was notchy but I heard they improved and the 26 spline his wasnt.

Dan

Posted by Camara90 (Member # 134) on :

With the 26 spline they can hold over 500hp. With my old 347 I twisted a 10 spline up like a pretzel on a 4 to 3 down shift on the freeway. Trans ended up fine, but input shaft looked crazy!

Posted by dirty money inc (Member # 7277) on :

quote:
Originally posted by turbo50:

quote:
Originally posted by sydewayzLX50:
how much tougher are these trannys than t5's? i dont know much about them.
My buddies JPH331's blown 351 used to break them regularly I think 606 at the wheels? and he hated the trans cuz it was notchy but I heard they improved and the 26 spline his wasnt.

Dan

the trans big matt got from jp?

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by dirty money inc:

quote:
Originally posted by turbo50:

quote:
Originally posted by sydewayzLX50:
how much tougher are these trannys than t5's? i dont know much about them.
My buddies JPH331's blown 351 used to break them regularly I think 606 at the wheels? and he hated the trans cuz it was notchy but I heard they improved and the 26 spline his wasnt.

Dan
the trans big matt got from jp?

Yup

Posted by dirty money inc (Member # 7277) on :

it had a 26 spline when i had it

Posted by SIC9250 (Member # 8216) on :

Well,ill be honest..my uncle and I bought the trans in LA for his 347 notch..they told us it was upgraded to a 26 spline input shaft and they took it out of a running/driving car..they gave us a 30 day warranty on the trans but we waited on it and ended up going with a t56(don't think warranty is still available but this trans shouldn't need one!)..TURBO50,we would be VERY willing to take it to your trans shop for your customer to have it checked out no problem at all! We are very confident that this trans is solid top to bottom,no worries at all..the cats we bought the trans from were very solid guys and had a little mustang shop of there own.. And not any part of the transaction was wiery or had us feeling cold feet..WE don't buy junk and def don't sell it..lmk fellas..great deal!

[ May 28, 2011, 06:42 AM: Message edited by: SIC9250 ]

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by SIC9250:
Well,ill be honest..my uncle and I bought the trans in LA for his 347 notch..they told us it was upgraded to a 26 spline input shaft and they took it out of a running/driving car..they gave us a 30 day warranty on the trans but we waited on it and ended up going with a t56(don't think warranty is still available but this trans shouldn't need one!)..TURBO50,we would be VERY willing to take it to your trans shop for your customer to have it checked out no problem at all! We are very confident that this trans is solid top to bottom,no worries at all..the cats we bought the trans from were very solid guys and had a little mustang shop of there own.. And not any part of the transaction was wiery or had us feeling cold feet..WE don't buy junk and def don't sell it..lmk fellas..great deal!

Great my guy may be contacting you out of the 510. No promises because he is talking with Gerald about building a g force but you never know.

Dan

Posted by v-town coupe (Member # 2771) on :

quote:
Originally posted by turbo50:

quote:
Originally posted by SIC9250:
Well,ill be honest..my uncle and I bought the trans in LA for his 347 notch..they told us it was upgraded to a 26 spline input shaft and they took it out of a running/driving car..they gave us a 30 day warranty on the trans but we waited on it and ended up going with a t56(don't think warranty is still available but this trans shouldn't need one!)..TURBO50,we would be VERY willing to take it to your trans shop for your customer to have it checked out no problem at all! We are very confident that this trans is solid top to bottom,no worries at all..the cats we bought the trans from were very solid guys and had a little mustang shop of there own.. And not any part of the transaction was wiery or had us feeling cold feet..WE don't buy junk and def don't sell it..lmk fellas..great deal!
Great my guy may be contacting you out of the 510. No promises because he is talking with Gerald about building a g force but you never know.

Dan

not to rob the thread but who is Gerald and is he a local T-5 builder? I used to use modern drivel line but hes in Idaho now so when I go to Get a g-force T-5 Id like to use someone local. thanks

Posted by turbo50 (Member # 6700) on :

quote:
Originally posted by v-town coupe:

quote:
Originally posted by turbo50:

quote:
Originally posted by SIC9250:
Well,ill be honest..my uncle and I bought the trans in LA for his 347 notch..they told us it was upgraded to a 26 spline input shaft and they took it out of a running/driving car..they gave us a 30 day warranty on the trans but we waited on it and ended up going with a t56(don't think warranty is still available but this trans shouldn't need one!)..TURBO50,we would be VERY willing to take it to your trans shop for your customer to have it checked out no problem at all! We are very confident that this trans is solid top to bottom,no worries at all..the cats we bought the trans from were very solid guys and had a little mustang shop of there own.. And not any part of the transaction was wiery or had us feeling cold feet..WE don't buy junk and def don't sell it..lmk fellas..great deal!
Great my guy may be contacting you out of the 510. No promises because he is talking with Gerald about building a g force but you never know.

Dan
not to rob the thread but who is Gerald and is he a local T-5 builder? I used to use modern drivel line but hes in Idaho now so when I go to Get a g-force T-5 Id like to use someone local. thanks

Modern driveline is the only place I used to deal with.

Now its 68Stanger aka Gerald.

Take a look on general chat

And Brandon, no thread Rob intended! Great deal on this!!

TTT

Posted by SIC9250 (Member # 8216) on :

Lol no thread jacking at all fellas! Do what u do! Its just another bump for this trans lol..to anyone else with a trans guy,I am very willing to work with u on this tremec just so the transaction goes smooth and there's no toes stepped on..I'm not tryin to be the most hated guy on this board by selling a 1000 dollar broke ass trans,and if u don't have a trans guy or shop to look at it,I'm very sure some sort of warranty on your cash can be worked out as long as all the proper steps are takin when the trans is installed [patriot]

just about a month ago we had a guy from the board (no name needs to be mentioned for he probably feels dumb anyway lol) purchase a CHERRY t5 from the same white notch I built with a 347/t56 and he never put fliud in it before he drove it and tried to come back with txt/phone calls sayin he was gonna come "ride" on us with his "posse"(not a good idea btw lol,we don't play those punk ass games) and that the trans was bad from the start..well my uncle is very patient and with correct word placment and some tricks up his sleeve he had the guy admit ViA txt that he didn't put trans fluid in it and drove it down the street lol [Roll Eyes]

and now the 2nd gear went out and he's out $300 cause he didn't pay attention..so bottom line is I want a solid transaction with this trans and am willing to do everything on our part to make sure the buyer has a solid tremec in there mustang and that's that.period. Thanks for the lead Turbo50 your a good ass cat brotha [Whoo Whooooo!]

[ May 28, 2011, 06:17 PM: Message edited by: SIC9250 ]

Posted by SIC9250 (Member # 8216) on :

Ttt [patriot]

Posted by SIC9250 (Member # 8216) on :

Up

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by SIC9250 (Member # 8216) on :

Goin up

Posted by SIC9250 (Member # 8216) on :

Up

Posted by SIC9250 (Member # 8216) on :

top

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by triple b (Member # 8763) on :

The 3550 is a good trans I have it in my coupe solid since the rebuild it is more notchy than a t5 but can handle more hp period bump for the seller

Posted by SF Coupe (Member # 1810) on :

What 5th gear is in it? I'm looking for a .80 5th gear 3550.

Posted by SIC9250 (Member # 8216) on :

quote:
Originally posted by SF Coupe:
What 5th gear is in it? I'm looking for a .80 5th gear 3550.

To be honest with ya bro I have NO idea! Have to run a part # or call Tremec..
[patriot]

Posted by SF Coupe (Member # 1810) on :

Do you have the tag? The pictured numbers are the individual part numbers, not the unit part number. If you can give me the numbers off the tag I can tell what gears it has.

Posted by SIC9250 (Member # 8216) on :

will do...pic up soon

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by SIC9250 (Member # 8216) on :

quote:
Originally posted by SF Coupe:
Do you have the tag? The pictured numbers are the individual part numbers, not the unit part number. If you can give me the numbers off the tag I can tell what gears it has.

Here's the tag bro

Posted by SF Coupe (Member # 1810) on :

It has a .68 5th gear, perfect for highway use but not what I'm looking for. GLWS.

Posted by SIC9250 (Member # 8216) on :

quote:
Originally posted by SF Coupe:
It has a .68 5th gear, perfect for highway use but not what I'm looking for. GLWS.

yep! thanks

Posted by SIC9250 (Member # 8216) on :

ttt [patriot]

Posted by SIC9250 (Member # 8216) on :

Ttt [Whoo Whooooo!]

Posted by SIC9250 (Member # 8216) on :

ttt [Razz]

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by SIC9250 (Member # 8216) on :

goin up $950...never thought i would see at time when TREMECS dont sell [Roll Eyes]

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by SIC9250 (Member # 8216) on :

Up

Posted by Shaolin Crane (Member # 10676) on :

Flexible on price at all?

Posted by SIC9250 (Member # 8216) on :

quote:
Originally posted by Shaolin Crane:
Flexible on price at all?

maybe $900 lol this trans could go for 1100-1300 on a good day [patriot]

Posted by 1RaW93SvT (Member # 9151) on :

quote:
Originally posted by SIC9250:

quote:
Originally posted by Shaolin Crane:
Flexible on price at all?
maybe $900 lol this trans could go for 1100-1300 on a good day

fuck i wish i could make some installments.. i would love this for the daily.. then maybe slap it on the cobra when the drive train is done..

Posted by bwkelley76 (Member # 8792) on :

...I think I've heard about this trans (all good of course) Affiliated with Darryl's Fabrication?? If not I could have you mixed up with another guy. Anyway this would be perfect for my setup if it has the 26-spline input. Wish I had the cash.

..Hey Dan, buy it and I'll make you some payments! haha. ...Kidding but not really.

Posted by 1RaW93SvT (Member # 9151) on :

yes brandons pops is named darryl.. he build nothin but bad ass shit all day everyday!! show winners ect ect..

Posted by bwkelley76 (Member # 8792) on :

Small world. Hard to believe he has a 20-somethin year-old kid!? lol. ..Man I'm gettin old!

I've run into Darryl a few times around town and he seems like a stand-up guy. I've been meaning to talk with him more since we're both in the business but we're always going different directions, on lunch breaks, or whatever. His '67 is one hell of a car. I've been wanting to show him my ride and see what he thinks of the whole project actually.

Is Darryl here on the forum?

Funny thing about the trans, I just saw Darryl and his car at the "Stangs in the park" show and randomly asked him if he knew of any tremecs available at a good price. He mentioned one that fits this description and gave me his card. He mentioned it was on a Mustang forum but I did not know it was on here. Just found this randomly last night while browsing the net for parts.

I'd love to get this trans for my ride but my funds are all wrapped up in my motor right now and I really hate being in debt or borrowing money, etc. I'm going to see if I can't figure out a way to work this out though, for reals. I think it would be perfect for my build. Don't get me wrong I'd love to be able to afford a TKO600, but it just doesn't fit in the budget.

I've pretty much sold all my parts to get my motor done even...lol.

The timing on this sucks!

[ June 20, 2011, 05:42 AM: Message edited by: bwkelley76 ]

Posted by SIC9250 (Member # 8216) on :

Ttt [patriot]

Posted by SIC9250 (Member # 8216) on :

Goin up...

Posted by triple b (Member # 8763) on :

I love my 3550 its notchy yes but a MGW shifter can take care of that...+ the added security of knowing that it can handle way more abuse than a t-5... TTT for ya sic.

Posted by SIC9250 (Member # 8216) on :

Thanks B,ya these trannys are SOLID and can handle the abuse all day especially an upgraded 26 spline one [patriot]

Posted by SIC9250 (Member # 8216) on :

ttt

Posted by SIC9250 (Member # 8216) on :

Still up for grabs fellas!

Posted by 91SuperchargedNotchOn24s (Member # 10866) on :

Pm sent

Posted by SIC9250 (Member # 8216) on :

Still goin up.. [patriot]

Posted by louie03cobra (Member # 9703) on :

quote:
Originally posted by SIC9250:
Still goin up..

would you take 800$ for it this saturday?How far are you from elk grove

Posted by SIC9250 (Member # 8216) on :

900$ FIRM!!! Not taking a loss on this guys,sorry [Roll Eyes]

Posted by cali95gt (Member # 8940) on :

.

[ July 31, 2011, 05:31 PM: Message edited by: cali95gt ]

Posted by 91SuperchargedNotchOn24s (Member # 10866) on :

quote:
Originally posted by cali95gt:
Be cautious, tranny may have defects and you wont get your money back.
http://www.californiafords.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=048807;p=1

Lol!!! Mayb that's why he didn't want to sell it to me!!!!!

Posted by SIC9250 (Member # 8216) on :

quote:
Originally posted by 91SuperchargedNotchOn24s:

quote:
Originally posted by cali95gt:
Be cautious, tranny may have defects and you wont get your money back.
http://www.californiafords.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=048807;p=1
Lol!!! Mayb that's why he didn't want to sell it to me!!!!!

I didn't sell it to u cause your broke ass did nothing but LOWBAL me cause u couldn't afford the asking price [Roll Eyes]

Posted by 91SuperchargedNotchOn24s (Member # 10866) on :

quote:
Originally posted by SIC9250:

quote:
Originally posted by 91SuperchargedNotchOn24s:

quote:
Originally posted by cali95gt:
Be cautious, tranny may have defects and you wont get your money back.
http://www.californiafords.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=048807;p=1
Lol!!! Mayb that's why he didn't want to sell it to me!!!!!
I didn't sell it to u cause your broke ass did nothing but LOWBAL me cause u couldn't afford the asking price

haha everybody on this site is broke to you!! I was ready to buy it on Wednesday that jus passed and u faked!! And u wanted to meet by the freeway cus supposedly your house was to far???funny!! It's good tho bro keep tryna sell ur tremec!goodluck lol!!!!!!!!

Posted by 5LTR SVT (Member # 7080) on :

will it fit a 94/95??

Posted by 65mustang408 (Member # 8681) on :

His is hella far the freeway!! Lol god damn 20 min drive through vinyards

Posted by SIC9250 (Member # 8216) on :

Lol go buy some 18"s and make your notch look somewhat decent..enjoy your broke t5 [Smile]

yes it should fit a 94/95 gt easy..google it [Wink]

Posted by 91SuperchargedNotchOn24s (Member # 10866) on :

quote:
Originally posted by SIC9250:
Lol go buy some 18"s and make your notch look somewhat decent..enjoy your broke t5 yes it should fit a 94/95 gt easy..google it

My notch does look decent,it just ain't YOUR style!and for YOUR info my t5 isn't broke!!!Lol!!!

Posted by SIC9250 (Member # 8216) on :

Lol your ridiculous..NO mustang looks good on big ass donk wheels guy..ur buggin bro get off this thread,if u got cash for the trans come buy it,if not GTFOH [Roll Eyes]

Fueled by Ford Mustang Owners
on CaliforniaFords.com